We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two Mini SAS 36-pin to four SATA breakout cables, 1M length

CableCreation

CableCreation Mini SAS 36Pin SFF-8087 to 4 SATA 7Pin 1M 2 Pack

SKU CH-E9Q0-8PWH0

Mini SAS 36-pin SFF-8087 male to four SATA 7-pin female cable connects a controller to four drives over one metre

  • Mini SAS 36Pin (SFF-8087) male connects to controller for high-throughput SAS interface
  • Four SATA 7-pin female connectors link up to four HDDs on the backplane
  • 1M / 3.3FT cable length gives flexible routing inside the chassis
  • Two-cable pack provides spare or dual-controller cabling in one purchase
  • Serial Attached SCSI design delivers fast data access for storage arrays

Mini SAS 36Pin SFF-8087 to 4 SATA 7Pin Cable

This two-pack of breakout cables connects a Mini SAS 36Pin (SFF-8087) male host controller to four SATA 7Pin female targets. Each cable measures 1M / 3.3FT in length. It is designed for builders wiring internal drive backplanes or direct-attached storage arrays.

Replaces individual SATA cables from the controller

Consolidate four separate SATA links into a single Mini SAS 36Pin (SFF-8087) connection for cleaner cable routing and higher-density drive attachment. The jump is worth it when your controller or HBA presents an SFF-8087 port and you need to fan out to four SATA drives or a backplane.

Push-on connectors require alignment

The SFF-8087 plug and SATA receptacles seat with a firm push; no tools are needed. Ensure the keyed SFF-8087 latch clicks fully home to avoid intermittent detection. Misaligned SATA connectors or bent pins on the backplane are the most common causes of link errors.

Highlights

  • Mini SAS 36Pin (SFF-8087) male connects to controller for high-throughput SAS interface
  • Four SATA 7-pin female connectors link up to four HDDs on the backplane
  • 1M / 3.3FT cable length gives flexible routing inside the chassis
  • Two-cable pack provides spare or dual-controller cabling in one purchase
  • Serial Attached SCSI design delivers fast data access for storage arrays

Specifications

No published specifications for this item yet.

Questions about this item

Will the 36-pin SFF-8087 connector fit my RAID controller's internal port?

The 36-pin SFF-8087 male connector plugs directly into a standard internal Mini SAS port on a controller or motherboard.

Which end connects to the controller and which to the drives during installation?

The SFF-8087 male end is the host side for the controller; the four SATA female ends are the target side for the backplane or drives.

How often should I replace the four SATA data connectors after repeated drive swaps?

SATA connectors are rated for many insertion cycles; replace a cable only if a connector feels loose or shows bent pins.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.