We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Mini SAS 36-pin male to four angled SATA female connectors, 3.3 ft black cable

CableCreation

CableCreation Mini SAS 36Pin SFF-8087 Male to 4x Angle SATA 7Pin Female Cable 3.3FT

SKU CH-B154-9YT25

Connects a Mini SAS 36-pin SFF-8087 controller to four angled SATA drives over 3.3 ft

  • Connects controller to four drives with one cable
  • Mini SAS 36-pin SFF-8087 male plugs into host
  • Four angled SATA 7-pin females fit tight backplanes
  • 0 metre length gives 3.3 ft of reach
  • Serial Attached SCSI interface built for high-throughput storage

Host-to-backplane connection

This CableCreation cable links a Mini SAS 36-pin (SFF-8087) male host port to four right-angle SATA 7-pin female connectors. It is built for internal storage arrays where a RAID controller or HBA drives multiple hard drives through a backplane. The 1.0 m length suits typical server and workstation chassis layouts.

Suits SAS/SATA backplane builds.

Installers wiring a controller to a hot-swap backplane will find the straight-to-angled layout convenient. Builders who need to connect individual drives directly to a motherboard or who require a different connector pitch should look at alternative cable types.

Mini SAS 36-pin (SFF-8087) male to four angle SATA

The single specification that determines compatibility is the Mini SAS 36-pin (SFF-8087) male host interface paired with four angled SATA 7-pin female target connectors. Verify that your controller presents an SFF-8087 port and that your backplane accepts standard SATA data plugs before purchasing.

Highlights

  • Connects controller to four drives with one cable
  • Mini SAS 36-pin SFF-8087 male plugs into host
  • Four angled SATA 7-pin females fit tight backplanes
  • 0 metre length gives 3.3 ft of reach
  • Serial Attached SCSI interface built for high-throughput storage

Specifications

No published specifications for this item yet.

Questions about this item

What connector does the 36-pin Mini SAS SFF-8087 male end plug into?

The 36-pin Mini SAS SFF-8087 male connector plugs into a SAS controller or host bus adapter that has a matching SFF-8087 port.

Which way round do the four angled SATA 7-pin female connectors go onto the drives?

Each angled SATA 7-pin female connector has an L-shaped key; align the key with the drive's SATA port so the cable runs parallel to the drive body.

How often should the 1.0 m cable be inspected or replaced in a server chassis?

Inspect the 1.0 m cable whenever the chassis is opened; replace it if the latch tabs are broken, the moulding is cracked or the conductors show corrosion.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.