We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 6-foot IEC C7 to NEMA 1-15P power cord with right-angle plug

CableCreation CP0019 IEC C7 to NEMA 1-15P 6 Feet Power Cord

SKU CH-XG67-8TGFX

Six-foot non-polarised IEC C7 to NEMA 1-15P power cord with 90-degree angle plug, 18 AWG, rated 7 A at 125 V, UL listed and CSA certified

  • Typetype
  • Color6 Feet
  • Length6 Feet
  • Connector NumberMale-to-Female
  • Terminal GenderMale to Female
  • SpecificationsCableCreation, 6 Feet, 125 volts, 6, feet, Male-to-Female, t
  • 90-degree angle fits tight spaces behind furniture
  • UL Listed and CSA certified for electrical safety
  • 6-foot length reaches outlets without excess slack
  • 18 AWG copper conductors rated 7A at 125V
  • Non-polarised C7 connector matches many TVs and printers

6 ft IEC C7 to NEMA 1-15P cord

This six-foot power cord connects devices with a two-prong figure-8 C7 inlet to a standard North American NEMA 1-15P wall outlet. The non-polarised design suits televisions, printers, projectors, game consoles and powered speakers that accept a 2.5 A 250 V or 7 A 125 V supply. It is intended for indoor replacement of a lost or damaged original cable.

18 AWG conductors and moulded strain relief

The cord uses 18 AWG copper conductors inside a heat-resistant PVC jacket with reinforced strain relief at both ends. UL and CSA listings confirm compliance with North American safety standards for continuous operation at the rated current. The 90-degree angled plugs allow the cable to sit flat against the wall in tight spaces without stressing the inlet.

Sustained load within rated limits

Under continuous draw up to the marked 7 A at 125 V or 2.5 A at 250 V the conductors and insulation remain within their temperature rating. The fully moulded connectors resist loosening or overheating during extended use such as long printing jobs or all-day television viewing. No active cooling or derating is required when the load stays within the stated ratings.

Highlights

  • 90-degree angle fits tight spaces behind furniture
  • UL Listed and CSA certified for electrical safety
  • 6-foot length reaches outlets without excess slack
  • 18 AWG copper conductors rated 7A at 125V
  • Non-polarised C7 connector matches many TVs and printers

Specifications

BrandCableCreation
ModelCP0019
Typetype
Color6 Feet
Length6 Feet
Connector NumberMale-to-Female
Terminal GenderMale to Female
SpecificationsCableCreation, 6 Feet, 125 volts, 6, feet, Male-to-Female, true
FeaturesMale-to-Female, true, 125 volts, 6 Feet, 6
Disclaimertrue

Questions about this item

How do I install the 90-degree IEC C7 connector without bending the cable?

Align the figure-8 socket squarely with the device inlet, push straight in until the moulded strain relief seats fully, then route the cord so the right-angle bend lies flat against the wall or furniture back.

What part of this CP0019 cord will need replacement first under normal use?

The non-polarized NEMA 1-15P plug blades or the IEC C7 female housing typically wear first; the 18 AWG copper conductors and PVC jacket are rated for long service life.

At what load does the 125 V 7 A rating become the limiting factor during sustained use?

Continuous draws above 7 A at 125 V (or 2.5 A at 250 V) will exceed the UL-listed rating, causing the 18 AWG conductors to heat beyond their design limit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.