We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved 6-pin male to three 15-pin SATA female power splitter cable 20in

Cable Matters G63STSLV 6 Pin to 3x 15 Pin SATA Power Splitter Cord 20in

SKU CH-20Y6-5A9E2

Connects an EVGA modular PSU to three SATA devices with a 6-pin male to triple 15-pin female splitter using 18AWG wire

  • TypeSpeaker Wires
  • ColorBlack
  • Connector DetailDVI to DVI
  • Terminal GenderFemale to Female
  • SpecificationsSATA Sleeved Port, 60 grams
  • FeaturesSATA Sleeved Port
  • Designed for EVGA Type1 modular PSUs including G1, G2, G3, G5, GS, GA, GM, B2, BQ, P2, T2 and select SuperNOVA models
  • 6-pin male to three 15-pin SATA female connectors power multiple drives from one PSU port
  • 18AWG tin-coated copper conductors rated to 1007 standard ensure reliable current delivery
  • Sleeved 20-inch main cable with 6-inch branches keeps routing tidy inside the case
  • Self-adhesive tape included for secure cable management during build or upgrade

Compatibility with specific EVGA PSUs

This adapter connects a six-pin modular port on listed EVGA power supplies to three standard SATA power connectors. It supports the Type 1 pinout found on G1, G1+, G2, G3, G5, GS, GA, GM, B2, BQ, P2, T2 and certain SuperNOVA models such as the 450GM, 550GM and 650G units.

Included self-adhesive tape for cable management

The bundle supplies one self-adhesive tape strip that helps secure the sleeved cables along the main 20-inch trunk and the two 6-inch branches. This keeps the three SATA connectors neatly routed inside the case without relying on zip ties or Velcro straps.

Not for semi-modular EVGA GQ or 1000W-plus units

The six-pin plug is wired only for the Type 1 modular interface; it will not fit or function correctly with semi-modular GQ series supplies or with 850GS, 1050GS and 1000PS models. Using it on those units risks damage to the power supply, drives or other connected devices.

Highlights

  • Designed for EVGA Type1 modular PSUs including G1, G2, G3, G5, GS, GA, GM, B2, BQ, P2, T2 and select SuperNOVA models
  • 6-pin male to three 15-pin SATA female connectors power multiple drives from one PSU port
  • 18AWG tin-coated copper conductors rated to 1007 standard ensure reliable current delivery
  • Sleeved 20-inch main cable with 6-inch branches keeps routing tidy inside the case
  • Self-adhesive tape included for secure cable management during build or upgrade

Specifications

BrandCable Matters
ModelG63STSLV
TypeSpeaker Wires
ColorBlack
Connector DetailDVI to DVI
Terminal GenderFemale to Female
SpecificationsSATA Sleeved Port, 60 grams
FeaturesSATA Sleeved Port

Questions about this item

Will the 18 AWG wires on this splitter need replacement after extended use?

The 18 AWG tin-coated copper conductors are rated for continuous power delivery; no scheduled replacement is required unless physical damage or connector wear appears.

What is the first limit reached when three drives draw power continuously through the 6-pin source?

The single 6-pin connection to the EVGA PSU caps total current at the supply's 6-pin rail rating, so that rail limit appears before the 18 AWG cable rating.

How much heat does the 20-inch main cable generate when all three SATA devices run all day?

18 AWG copper keeps resistive heating minimal at typical SATA loads; the sleeved 20-inch main run stays near ambient temperature during sustained operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.