We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black dynamic microphones with 6.35 mm plugs and 15 ft cables

Cable Matters 500301x2 2-Pack 6.35mm Microphones 15 ft Cable

SKU CH-G1K8-72TR5

Two cardioid dynamic vocal microphones with 15 ft cables and 6.35 mm plugs for karaoke or live singing

  • ColorBlack
  • Connector6.35 mm Jack
  • Microphone Sensitivity-50 decibels
  • Microphone Impedance600 ohm
  • Microphone Signal to Noise Ratio(SNR)60 decibels
  • FeaturesRuns on Plug-In Power
  • Cardioid pattern isolates vocals and reduces background noise
  • 15 ft cables give freedom to move on stage or in studio
  • Plug-and-play 6.35 mm jack works instantly with standard AUX inputs
  • 50 dB sensitivity and 600 ohm impedance capture detail across varied sound levels
  • Two microphones in one pack cover duets or backup singers

Two-pack cardioid dynamic microphones

This two-pack supplies two cardioid dynamic microphones with 6.35 mm connectors and 15 ft cables. They are aimed at singers, karaoke hosts and presenters who need a matched pair for duets, interviews or backup units. The plug-and-play design works with any standard AUX input.

Sustained-use behaviour

The cardioid pickup pattern isolates the primary voice while rejecting off-axis sound during long sessions. A sensitivity of -50 dB and 600 ohm impedance maintain consistent output levels across varied vocal dynamics. The 15 ft cable length supports free movement on stage or in a rehearsal space without signal degradation.

Replaces single or mismatched mics

Upgrading from a single microphone or a mixed pair eliminates level imbalances and simplifies gain staging for two-person performances. The matched frequency response of 50 Hz to 15 kHz ensures both voices sit evenly in the mix. Buyers needing wireless freedom or XLR connectivity should look elsewhere.

Highlights

  • Cardioid pattern isolates vocals and reduces background noise
  • 15 ft cables give freedom to move on stage or in studio
  • Plug-and-play 6.35 mm jack works instantly with standard AUX inputs
  • 50 dB sensitivity and 600 ohm impedance capture detail across varied sound levels
  • Two microphones in one pack cover duets or backup singers

Specifications

BrandCable Matters
Model500301x2
Part Number500301x2
ColorBlack
Connector6.35 mm Jack
Microphone Sensitivity-50 decibels
Microphone Impedance600 ohm
Microphone Signal to Noise Ratio(SNR)60 decibels
FeaturesRuns on Plug-In Power

Questions about this item

Does the 600 ohm impedance and -50 dB sensitivity of the 500301x2 microphones require a preamp for all-day karaoke sessions?

The 600 ohm output impedance and -50 dB sensitivity are designed for direct plug-in power operation, so no external preamp is needed for typical karaoke or singing use.

What input jack must my mixer or speaker have to accept the 6.35 mm connectors on these two microphones?

Each microphone ends in a 6.35 mm TS plug, so your mixer, PA speaker or karaoke machine needs a standard 6.35 mm (1/4 inch) input for both units to work.

Will the 15 ft cables on the 500301x2 reach a mixer placed beside older XLR-only stage gear without adapters?

The cables terminate in 6.35 mm TS plugs, not XLR, so you would need 6.35 mm to XLR adapters or cables to connect them to legacy XLR inputs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.