Cable Leader
Cable Leader SDE1 1.5ft IEC C14 to C13 Power Extension Cord 16 AWG 13A 250V Black
A 1.5 ft IEC C14 to C13 extension cord with 16 AWG copper, 13 A / 250 V rating, SJT jacket, UL listed and CSA certified for rack PDU or UPS connections
- FeaturesThis 1.5ft power extension cord is made by Cable Leader and
- Extends reach between PDU and equipment with male C14 to female C13 connectors
- 16 AWG copper handles 13 A at 250 V for server and rack loads
- SJT jacket rated 105 °C and 300 V withstands data-centre heat
- Black jacket simplifies circuit and phase tracing at a glance
- UL Listed and CSA certified (file E210037) plus RoHS compliant
Rack Power Extension for C14/C13
This 1.5ft IEC 60320 C14 to C13 cord adds reach between a rack PDU, UPS or server and your existing power cable. The black SJT jacket helps trace circuits and phases at a glance. It is built with 16 AWG three-conductor copper rated for 13A at 250V and carries a 105C / 300V cable rating. UL Listed and CSA certified (file E210037) with RoHS compliance.
Upgrade from Shorter or Thinner Cords
Replaces a short factory cord or an 18 AWG lead that only handles 10A when the load needs 13A. The jump is worth it when the equipment draws more than 10A or when the PDU outlet sits beyond the reach of the original cable. It is not for buyers who need a heavier 14 AWG or 12 AWG gauge for 15A or 20A circuits.
Steady 13A Load on 16 AWG Copper
The 16 AWG conductors and 105C temperature rating are designed for continuous server, rack and data-center loads rather than brief peaks. The SJT jacket and grounded three-conductor construction maintain stable current delivery at 13A / 250V. It is not for installations that exceed the 13A rating or require a higher ampacity cable.
Highlights
- Extends reach between PDU and equipment with male C14 to female C13 connectors
- 16 AWG copper handles 13 A at 250 V for server and rack loads
- SJT jacket rated 105 °C and 300 V withstands data-centre heat
- Black jacket simplifies circuit and phase tracing at a glance
- UL Listed and CSA certified (file E210037) plus RoHS compliant
Specifications
| Brand | Cable Leader |
|---|---|
| Model | SDE1 |
| Features | This 1.5ft power extension cord is made by Cable Leader and features a style with material. It supports a voltage of 125.00 volts and an input current of 13 amps. The cable is in color and is UL listed. It comes with a Female-to-Male connector and does not require batteries. |
Questions about this item
What length and connectors does this SDE1 cord use to reach from a PDU to my existing C13 cable?
The cord is 1.5ft long with a male IEC 60320 C14 plug on one end and a female C13 socket on the other, adding reach between a PDU, UPS or server and your existing cord.
How do I connect this extension without creating a loose link, and what mistake should I avoid?
Insert the male C14 plug fully into the PDU or UPS outlet until it seats firmly, then plug your device's C13 connector into the female end; the common error is leaving either end partially seated, which can cause intermittent power.
When should I replace this cable, and what wear signs indicate it is time?
Replace the cord if the SJT jacket shows cuts, cracking from 105C heat exposure, deformed pins, or discoloration at the connectors; the 16 AWG copper conductors and UL/CSA certification (file E210037) support long service, but physical damage requires immediate replacement.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.0011546BTC
In stock
