Cable Leader
Cable Leader PW116-7206 72in 14 AWG 15A 125V Red computer power cord
A 72-inch red power cord with a NEMA 5-15P plug and IEC 60320 C13 connector, rated 15A at 125V using 14 AWG SJT cable, UL listed
- Length72 inches
- Connector DetailFemale-to-Male
- SpecificationsVoltage: 125.00 volts; Current: 15 amps; Weight: 0.80 lb; Co
- Heavy-duty 14 AWG copper handles 15A at 125V
- Six-foot length gives flexible placement for desktop gear
- NEMA 5-15P to IEC C13 fits PCs, monitors, printers
- UL Listed and CSA certified for verified safety
- Molded connectors with strain relief prevent cable damage
Cord Construction and Rating
The Cable Leader PW116-7206 is a 72-inch heavy-duty power cord built with 14 AWG SJT copper conductors rated for 15 amps at 125 volts. It carries UL and CSA certifications plus RoHS compliance for safe, grounded power delivery.
Connectors and Everyday Use
A NEMA 5-15P plug on one end mates with a standard North American wall outlet while an IEC 60320 C13 receptacle on the other fits most PCs, monitors, printers and similar equipment. Molded strain relief protects the joints during routine plugging and unplugging.
Temperature Performance Under Load
The cable jacket is rated to 105 degrees Celsius and the conductors are approved for 300 volts, giving ample headroom when the cord supplies continuous current at its full 15-amp rating. The three-wire grounded design maintains safety during sustained operation.
Highlights
- Heavy-duty 14 AWG copper handles 15A at 125V
- Six-foot length gives flexible placement for desktop gear
- NEMA 5-15P to IEC C13 fits PCs, monitors, printers
- UL Listed and CSA certified for verified safety
- Molded connectors with strain relief prevent cable damage
Specifications
| Brand | Cable Leader |
|---|---|
| Model | PW116-7206 |
| Length | 72 inches |
| Connector Detail | Female-to-Male |
| Specifications | Voltage: 125.00 volts; Current: 15 amps; Weight: 0.80 lb; Connector: Female-to-Male; UL Listed: true |
Questions about this item
How do I install the NEMA 5-15P to C13 cord, and what step do people often miss?
Plug the C13 end fully into the device inlet until it clicks, then insert the 5-15P plug into a grounded 125 V outlet; the step often missed is confirming the ground pin makes solid contact.
What maintenance or replacement will this 14 AWG SJT cord need over time?
Inspect the molded strain reliefs and jacket for cracks or heat discoloration; replace the cord if the insulation hardens, the connectors loosen, or the ground continuity is lost.
What limit appears first when this 15 A 125 V cable runs under sustained load?
The 15 A rating is the first limit; continuous draw above 15 amps will overheat the 14 AWG conductors and trip the circuit breaker.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



