Cable Leader
Cable Leader PW116-7202 2ft 14 AWG NEMA 5-15P to C13 Red
Two-foot heavy-duty 14 AWG cord connects a NEMA 5-15P plug to a C13 inlet at 15 amps and 125 volts, UL listed and red
- Length2 feet
- Connector DetailFemale-to-Male
- SpecificationsVoltage: 125.00 volts; Current: 15 amps; Weight: 0.40 lb; Co
- Heavy-duty 14 AWG copper handles 15 A continuous load
- UL Listed and CSA certified for verified electrical safety
- Molded strain-relief connectors resist pull-out damage
- Compact 2 ft length reduces cable clutter
- Red jacket simplifies cord identification in dense racks
Red 2 ft 14 AWG power cord
The Cable Leader PW116-7202 is a 2-foot heavy-duty AC cable with a red SJT jacket. It connects a NEMA 5-15P plug to an IEC 60320 C13 receptacle using 14 AWG copper conductors. The cord is rated for 15 A at 125 V and carries UL and CSA certifications.
Suits equipment near the outlet
This short length works well for rack gear, desktop PCs, monitors or printers that sit close to a wall socket or PDU. Builders needing longer runs, higher ampacity or a different wire gauge should select another cable.
14 AWG decides current capacity
The 14 AWG conductor size supports the full 15 A rating at 125 V, so the cord matches standard North American outlet circuits. A thinner gauge would limit the safe load for the same connectors.
Highlights
- Heavy-duty 14 AWG copper handles 15 A continuous load
- UL Listed and CSA certified for verified electrical safety
- Molded strain-relief connectors resist pull-out damage
- Compact 2 ft length reduces cable clutter
- Red jacket simplifies cord identification in dense racks
Specifications
| Brand | Cable Leader |
|---|---|
| Model | PW116-7202 |
| Length | 2 feet |
| Connector Detail | Female-to-Male |
| Specifications | Voltage: 125.00 volts; Current: 15 amps; Weight: 0.40 lb; Connector: Female-to-Male; UL Listed: true |
Questions about this item
Will the 14 AWG conductors and SJT jacket stay cool when this cord runs at 15 A all day?
The 14 AWG copper conductors and 105 °C SJT rating are built for continuous 15 A / 125 V operation without overheating.
My monitor has a C13 inlet — do I need any adapter or extra cable to use this cord?
No adapter is needed; the cord terminates in a standard IEC 60320 C13 female connector that plugs directly into the monitor inlet.
Can I keep using my older C13-equipped printer or scanner with this red 2 ft cord?
Yes, the C13 end fits any legacy device with a standard IEC 60320 C13 inlet, so older printers, scanners or PCs work without changes.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



