Cable Leader
Cable Leader PW101-1225 25ft 18 AWG 10A 125V NEMA 5-15P to C13 Power Extension Cord Black
Extends AC power 25 ft with an 18 AWG SJT cord, NEMA 5-15P to IEC 60320 C13, rated 10 A at 125 V, UL listed and CSA certified
- FeaturesThis 25ft power extension cord is made by Cable Leader and f
- 25 ft reach lets you place equipment farther from the outlet
- 18 AWG SJT copper conductors rated 10 A at 125 V for reliable power delivery
- NEMA 5-15P to IEC 60320 C13 connectors fit most PCs, monitors and servers
- UL Listed and CSA certified (file E210037) with RoHS compliance for safety assurance
- Molded strain-relief ends and fully grounded 3-wire design reduce wear and shock risk
25ft Extension Cord for IEC Equipment
This 25ft power extension cord connects a NEMA 5-15P plug to an IEC 60320 C13 receptacle. It suits PCs, monitors, servers, printers and other devices that use the standard three-pin shroud connector. The black SJT jacket covers 18 AWG grounded copper conductors rated for 10A at 125V. It is a direct replacement or reach-extension for existing AC power cords.
UL Listed 105C Cable Rating
The cord carries UL and CSA certification (file E210037) and meets RoHS requirements. Its 300V, 105C rated SJT jacket handles normal operating temperatures without softening. Molded connectors with integral strain relief protect the three-wire grounded assembly from bending stress at the plug and receptacle ends. No active cooling or noise is involved.
Lifetime Replacement Guarantee
Cable Leader backs the cord with a US-based lifetime warranty that replaces the unit if it ever fails. The package contains only the single 25ft black cable; no additional adapters, cable ties or software are bundled. The warranty covers the cord itself rather than connected equipment. Buyers needing a shorter length or a different colour will need a separate model.
Highlights
- 25 ft reach lets you place equipment farther from the outlet
- 18 AWG SJT copper conductors rated 10 A at 125 V for reliable power delivery
- NEMA 5-15P to IEC 60320 C13 connectors fit most PCs, monitors and servers
- UL Listed and CSA certified (file E210037) with RoHS compliance for safety assurance
- Molded strain-relief ends and fully grounded 3-wire design reduce wear and shock risk
Specifications
| Brand | Cable Leader |
|---|---|
| Model | PW101-1225 |
| Features | This 25ft power extension cord is made by Cable Leader and features a style with material. It supports a voltage of 125.00 volts and an input current of 10 amps. The cable is in color and is UL listed. It comes with a Female-to-Male connector and does not require batteries. |
Questions about this item
How do I connect the NEMA 5-15P plug and C13 connector correctly?
Insert the 5-15P plug fully into a 125V outlet until the ground pin seats, then push the C13 end into the device inlet until the latch clicks — the step most people miss is verifying the latch engages on the C13 side.
When should I replace this 18 AWG SJT cord?
Replace it if the jacket shows cuts, the moulded strain relief cracks, the ground pin bends, or the C13 latch no longer holds — the 105C rating means heat damage appears as stiff or discoloured insulation.
What is the continuous-load limit before the cord overheats?
The 10A 125V rating is the hard limit; drawing more than 10 amps continuously on the 18 AWG copper will exceed the 300V SJT rating and trip the UL-certified safety margin.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



