Cable Leader
Cable Leader OM1 ST-ST Duplex 62.5/125µm 10m Orange OFNR Corning FB103-5410
A 10-metre multimode duplex patch cable with ST connectors and Corning fiber for 1G and 10G short-reach links
- ColorOrange
- Length31 - 50 ft.
- Connector Number2
- OM1 multimode supports 1G and 10G short-reach links
- Genuine Corning fiber ensures consistent optical performance
- ST/UPC ceramic ferrules provide secure low-loss connections
- OFNR riser-rated jacket suits in-building and data center runs
- 10m duplex length connects switches, servers and patch panels
Data center patch cable
The Cable Leader OM1 duplex jumper uses genuine Corning fiber with ST/UPC connectors to link switches, servers and transceivers in enterprise and SAN environments. It carries 1000BASE-SX and 10GBASE-SR signals over a 10m run. The 62.5/125µm multimode core is colour-coded orange for quick identification in dense panels.
OFNR riser-rated jacket
The orange riser-rated jacket meets OFNR requirements for in-building vertical and horizontal runs without conduit. Duplex construction keeps transmit and receive fibers paired and correctly oriented from end to end. Push-pull ST latching provides secure, repeatable mating on patch panels, media converters and SFP or QSFP modules.
Passive optical link
As a passive cable assembly it draws no power and produces no noise or heat of its own. Insertion loss stays within OM1 limits for 10G short-reach distances up to 10m. Ceramic ferrules maintain low-loss performance through repeated connect and disconnect cycles in daily operations.
Highlights
- OM1 multimode supports 1G and 10G short-reach links
- Genuine Corning fiber ensures consistent optical performance
- ST/UPC ceramic ferrules provide secure low-loss connections
- OFNR riser-rated jacket suits in-building and data center runs
- 10m duplex length connects switches, servers and patch panels
Specifications
| Brand | GENERIC |
|---|---|
| Color | Orange |
| Length | 31 - 50 ft. |
| Connector Number | 2 |
Questions about this item
What bandwidth does the OM1 multimode rating cap for 10G links?
OM1 multimode fiber limits 10GBASE-SR to 33 meters, so this 10m cable stays well within the short-reach distance.
What panel opening or ferrule size do the ST/UPC connectors need?
Each end uses a 2.5 mm ceramic ferrule in a push-pull ST body that fits standard ST bulkhead adapters.
How do I seat the duplex clip so transmit and receive stay aligned?
Press both connectors into the adapter until the bayonet locks; the duplex clip keeps the paired fibers oriented and prevents cross-connection.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



