We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 5 ft C14 to C15 power cord with notched high-temp connector and SJT jacket

Cable Leader

Cable Leader C14 to C15 PDU Power Cord 14 AWG 15A 250V White 5ft

SKU CH-H9CF-F7X14

Heavy-duty 14 AWG jumper connects a rack PDU to high-temperature C16 inlets on switches and servers

  • ColorWhite
  • Length5 - 10 ft.
  • Connector Number2
  • Wire Gauge14 AWG
  • C14-to-C15 jumper connects hot-running gear to rack PDUs
  • Notched C15 connector fits high-temperature C16 inlets on switches and servers
  • Heavy-duty 14 AWG copper rated 15A at 250V for reliable power delivery
  • White SJT jacket simplifies circuit identification in dense racks
  • UL Listed and CSA certified (file E210037) for verified safety

C14 to C15 PDU jumper for hot gear

This white 14 AWG cord connects a rack PDU or C13 outlet to equipment with a high-temperature C16 inlet. The notched C15 end is rated for the heat that network switches and dense servers produce. It is built for 15A at 250V with a 105C SJT jacket.

Installation and common issues

Plug the C14 end into the PDU and the C15 end into the device inlet; the notch only fits one way. A frequent mistake is using a standard C13 plug on a C16 inlet, which will not seat and can melt under load. The 14 AWG copper handles the rated current without overheating when fully inserted.

Gauge decides the load

The 14 AWG conductor is rated for up to 15A, matching the cord's 15A/250V label and the UL file E210037 certification. Lighter 16 AWG or 18 AWG cords cannot carry this current safely. Choose this gauge when the connected equipment draws up to 15A from the PDU.

Highlights

  • C14-to-C15 jumper connects hot-running gear to rack PDUs
  • Notched C15 connector fits high-temperature C16 inlets on switches and servers
  • Heavy-duty 14 AWG copper rated 15A at 250V for reliable power delivery
  • White SJT jacket simplifies circuit identification in dense racks
  • UL Listed and CSA certified (file E210037) for verified safety

Specifications

BrandGENERIC
ColorWhite
Length5 - 10 ft.
Connector Number2
Wire Gauge14 AWG

Questions about this item

How can I confirm the cord is rated for 15 A at 250 V after I plug it in?

Check the jacket printing for 14 AWG, 15A/250V, SJT, 105C/300V and the UL/CSA file E210037 mark.

What comes in the box and do I need any extra parts to connect a switch with a C16 inlet to a PDU?

The cord includes the C14 plug and notched C15 connector only; no extra adapters are required if the PDU has C13/C14 outlets and the switch has a C16 inlet.

Which gauge should I choose for a 15 A server load — 14 AWG or 12 AWG?

The 14 AWG version is rated up to 15 A; choose 12 AWG only when the circuit is rated for 20 A.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.