We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 8-foot power cord with three-prong plug and C13 connector, SJT jacketed

Cable Leader

Cable Leader 8ft NEMA 5-15P to C13 Power Cord 16 AWG 13A 125V Black

SKU CH-FW31-DMDK5

An 8-foot grounded power cord with a NEMA 5-15P plug and C13 connector, rated 16 AWG 13A 125V, UL Listed and CSA certified

  • ColorBlack
  • Length5 - 10 ft.
  • Connector Number2
  • Wire Gauge16 AWG
  • 8 ft length reaches wall outlets or PDUs without stretching
  • 16 AWG 13 A 125 V rating powers computers and monitors safely
  • Fully grounded 3-wire design with molded strain relief prevents accidental disconnects
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for verified safety
  • Works with PCs, monitors, servers, printers and most IEC-60320 C13 equipment

Universal 5-15P to C13 power cord

This eight-foot cord connects a computer, monitor, server or printer to a standard wall outlet or power strip. The NEMA 5-15P plug fits North American receptacles while the IEC 60320 C13 connector matches the inlet on most IT equipment. A fully moulded, three-wire grounded design with strain relief provides a secure, long-lasting connection. UL Listed and CSA certified (file E210037), RoHS compliant.

16 AWG gauge handles 13 A at 125 V

The SJT-jacketed, three-conductor copper cable is rated for 13 amps at 125 volts with a 105 °C / 300 V insulation rating. This gauge comfortably powers typical desktop PCs, monitors and office peripherals. It runs out of headroom for equipment that draws more than 13 amps continuously, such as high-density servers or 20 A PDU loads. For those heavier draws a thicker gauge is required.

NEMA 5-15P plug limits use to 15 A circuits

The 5-15P plug is keyed for standard 15-amp branch circuits and 125-volt outlets. It cannot be inserted into 20-amp twist-lock or industrial receptacles, so the cord cannot serve equipment that requires a 20-amp inlet or higher voltage. The C13 end is limited to the 10-amp rating of the IEC 60320 standard, even though the cable itself carries 13 amps.

Highlights

  • 8 ft length reaches wall outlets or PDUs without stretching
  • 16 AWG 13 A 125 V rating powers computers and monitors safely
  • Fully grounded 3-wire design with molded strain relief prevents accidental disconnects
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for verified safety
  • Works with PCs, monitors, servers, printers and most IEC-60320 C13 equipment

Specifications

BrandGENERIC
ColorBlack
Length5 - 10 ft.
Connector Number2
Wire Gauge16 AWG

Questions about this item

Will the 16 AWG cord handle the same 13 A load as the 18 AWG cable I'm replacing?

Yes — 16 AWG is rated for 13 A at 125 V, while 18 AWG is limited to 10 A, so this cord supports a higher continuous draw.

How can I verify the cord is properly grounded after plugging it in?

The molded 5-15P plug and C13 connector each carry three conductors; a simple outlet tester will confirm ground continuity on the 5-15P side.

Does the package include any adapters or mounting hardware, or just the cord itself?

Only the 8 ft NEMA 5-15P to IEC 60320 C13 cord is supplied; no adapters, brackets or extra hardware are included.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.