We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 7 ft IEC C14 to C15 power cord with notched high-temp connector and thick SJT jacket

Cable Leader

Cable Leader 7 ft IEC C14 to C15 Heavy Duty PDU Power Cord 14 AWG 15A 250V Black computer power adapter cord

SKU CH-8PWB-23DNX

Heavy-duty 14 AWG PDU jumper with IEC C14 plug and high-temperature C15 connector for 15A 250V rack equipment

  • ColorBlack
  • Length5 - 10 ft.
  • Connector Number2
  • Wire Gauge14 AWG

Length 7ft

  • C14-to-C15 jumper powers high-temp C16 inlet gear from rack PDU
  • Notched C15 connector rated for 105C handles heat from network switches and servers
  • Heavy-duty 14 AWG copper carries 15A at 250V for reliable server power
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for safety
  • Black SJT jacket enables colour-coded circuit organisation in the rack

IEC C14 to C15 PDU jumper

This seven-foot cord connects a rack PDU or C13 outlet to equipment that uses a high-temperature C16 inlet. The notched C15 connector is required for network switches and other gear that runs hot. It is intended for data-centre and server-room builds where standard C13 cords cannot be used.

Heavy-duty 14 AWG SJT construction

Three-conductor copper wiring with an SJT jacket rated to 105C and 300V carries 15A at 250V. The black jacket helps colour-code circuits inside the rack. UL Listed and CSA certified to file E210037 with RoHS compliance.

15A rating for high-draw equipment

The 14 AWG gauge supports up to 15 amps, making it suitable for servers, PDUs and other higher-draw devices. It will not support 20A loads that require 12 AWG cable. Buyers needing a standard C13 connector or a longer reach should select a different cord.

Highlights

  • C14-to-C15 jumper powers high-temp C16 inlet gear from rack PDU
  • Notched C15 connector rated for 105C handles heat from network switches and servers
  • Heavy-duty 14 AWG copper carries 15A at 250V for reliable server power
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for safety
  • Black SJT jacket enables colour-coded circuit organisation in the rack

Specifications

BrandGENERIC
ColorBlack
Length5 - 10 ft.
Connector Number2
Wire Gauge14 AWG

Other versions of this model

2 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What does the IEC 60320 C14-to-C15 connection support?

The C14 plug fits a rack PDU or C13/C14 outlet, while the notched C15 connector mates with a high-temperature C16 inlet on servers and network switches.

What clearance does the 14 AWG SJT cable need for routing?

The 14 AWG SJT jacket is rated 105°C / 300V and is a standard round cable; allow enough bend radius for a 7 ft jumper in a rack environment.

How is the cord installed and what step is often missed?

Insert the C14 end into the PDU or C13/C14 source, then seat the notched C15 fully onto the equipment C16 inlet — the notch must align or the connector will not lock.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.