We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 6 ft power cord with three-prong plug and stripped ROJ end, SJT jacket

Cable Leader

Cable Leader 6ft NEMA 5-15P to ROJ Power Cord, 18 AWG SJT 13A/125V, Black

SKU CH-Y9JM-SWTA5

A six-foot grounded cord with a standard wall plug and a stripped ROJ end for wiring into equipment, rated 13 A at 125 V with UL and CSA certification

  • ColorBlack
  • Length5 - 10 ft.
  • Connector Number2
  • Wire Gauge18 AWG

Length 6ft

  • 6 ft length reaches wall outlets or PDUs easily
  • 18 AWG SJT cable rated 13 A / 125 V handles PC and monitor loads
  • UL Listed and CSA certified (file E210037) for verified safety
  • Fully molded 3-wire grounded design with strain relief prevents loose connections
  • Black finish blends with standard office and server rack equipment

6 ft NEMA 5-15P to ROJ cord

This six-foot power cord links a standard North American wall outlet or power strip to equipment fitted with an IEC 60320 ROJ inlet. It suits desktop PCs, monitors, printers, servers and similar devices that accept a three-pin ROJ connection. The black SJT jacket and moulded connectors provide a tidy, durable installation for office or home use.

Sustained-load behaviour

The 18 AWG three-conductor copper cable is rated for 13 A at 125 V and carries a 105 °C, 300 V SJT insulation rating, so it maintains its electrical and thermal performance during continuous operation. UL listing and CSA certification (file E210037) confirm compliance with North American safety standards under prolonged load. The fully grounded three-wire design with strain relief resists heating and mechanical fatigue over time.

18 AWG gauge limit

At 18 AWG the cord is rated for up to 10 A on light electronics; it is not suitable for computers, servers or PDUs that draw 13 A or more, which require 16 AWG or heavier conductors. Builders needing higher continuous current must select a thicker-gauge cord.

Highlights

  • 6 ft length reaches wall outlets or PDUs easily
  • 18 AWG SJT cable rated 13 A / 125 V handles PC and monitor loads
  • UL Listed and CSA certified (file E210037) for verified safety
  • Fully molded 3-wire grounded design with strain relief prevents loose connections
  • Black finish blends with standard office and server rack equipment

Specifications

BrandGENERIC
ColorBlack
Length5 - 10 ft.
Connector Number2
Wire Gauge18 AWG

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much heat or power loss should I expect from the 18 AWG SJT cable when it runs continuously at its 13A 125V rating?

The 18 AWG SJT cord is rated for 13A at 125V with a 105C jacket and 300V insulation, so under normal continuous load it operates within its thermal limits without excessive heat buildup.

What equipment must I already have that accepts an IEC 60320 ROJ connector for this cord to work?

You need a device with an IEC 60320 ROJ inlet — typical examples are desktop PCs, monitors, servers, printers or any gear using that standard three-pin inlet.

Will the NEMA 5-15P plug fit the older power strips and PDUs I already own?

Yes, the 5-15P plug is the standard North American three-prong outlet format used on virtually all legacy power strips, wall receptacles and PDUs.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.