We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 6 ft power cord with NEMA 5-15P plug and C13 connector, SJT jacketed

Cable Leader

Cable Leader 6ft NEMA 5-15P to C13 14 AWG 15A 125V SJT Black

SKU CH-B9GS-9SRM9

A heavy-duty 14 AWG power cord with a NEMA 5-15P plug and IEC C13 connector, rated 15A at 125V and UL Listed for safe equipment power

  • ColorBlack
  • Length5 - 10 ft.
  • Connector Number2
  • Wire Gauge14 AWG

Length 6ft

  • 6 ft length reaches wall outlets and PDUs easily
  • 14 AWG copper handles up to 15 A for servers and high-draw gear
  • SJT jacket rated 105 °C / 300 V resists heat and wear
  • UL Listed and CSA certified (file E210037) for verified safety
  • Fully molded 3-wire grounded design with strain relief prevents accidental disconnects

Power cord for computers and monitors

The Cable Leader 6 ft power cord connects a PC, monitor, server or printer to a standard wall outlet or PDU. It uses a 3-prong NEMA 5-15P plug on one end and an IEC 60320 C13 connector on the other. The 14 AWG copper conductors are rated for 15A at 125V and carry UL and CSA certification.

Heavy-duty 14 AWG construction under load

The SJT-jacketed cable is rated 105C and 300V, with three grounded conductors moulded into the connectors. At 14 AWG the cord supports up to 15A continuously, making it suitable for servers, PDUs and higher-draw equipment rather than light electronics. Strain relief on both ends protects the terminations during repeated insertion cycles.

Practical limits of the 5-15P interface

The NEMA 5-15P plug fits standard 15A North American outlets and cannot be used on 20A circuits that require a 5-20P plug. Devices drawing more than 15A or operating above 125V need a different cordset. Buyers who need 20A capacity or a locking connector should select a heavier gauge or alternative plug type.

Highlights

  • 6 ft length reaches wall outlets and PDUs easily
  • 14 AWG copper handles up to 15 A for servers and high-draw gear
  • SJT jacket rated 105 °C / 300 V resists heat and wear
  • UL Listed and CSA certified (file E210037) for verified safety
  • Fully molded 3-wire grounded design with strain relief prevents accidental disconnects

Specifications

BrandGENERIC
ColorBlack
Length5 - 10 ft.
Connector Number2
Wire Gauge14 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 14 AWG SJT jacket stay cool when the cord runs at 15 A all day?

The 14 AWG conductors are rated 15 A / 125 V with a 105 °C / 300 V SJT jacket, so normal continuous loads stay within the cable’s thermal limits.

What must the buyer already have for this cord to work?

A NEMA 5-15R outlet (or power strip / PDU) on the supply side and an IEC 60320 C14 inlet on the device side.

Will the C13 connector fit the C14 inlet on my older server or monitor?

Yes — the IEC 60320 C13 plug mates with any standard C14 inlet found on legacy PCs, monitors, servers and printers.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.