We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 6 ft twist-lock power cord with L5-30P plug and L5-30R connector, thick 10 AWG jacket

Cable Leader

Cable Leader 6 ft NEMA L5-30P to L5-30R Locking Power Cord 10 AWG 30A 125V Black

SKU CH-A3AP-MMT3M

A 6 ft locking cord with 10 AWG copper and a twist-lock L5-30 connector rated for 30 A at 125 V

  • TypePower
  • ColorBlack
  • Length6 ft.
  • Terminal GenderMale to Female
  • Wire Gauge10 AWG
  • Twist-lock L5-30P to L5-30R prevents accidental disconnection in racks
  • Heavy-duty 10 AWG copper handles 30A at 125V for demanding equipment
  • SJTW jacket rated 105C and 300V withstands harsh data-centre conditions
  • UL Listed and CSA certified (file E210037) confirms safety compliance
  • Black jacket enables quick circuit identification in dense rack environments

Secure locking power cord for rack equipment

The Cable Leader 6 ft NEMA L5-30P to L5-30R locking power cord connects servers, PDUs and similar equipment to a matching locking outlet. Its twist-lock plug secures the connection so it cannot be pulled loose in a rack or under vibration. Heavy-duty 10 AWG copper conductors carry 30 A at 125 V inside an SJTW jacket rated to 105 °C and 300 V.

Check outlet type and circuit rating

Verify that your power source provides a NEMA L5-30R receptacle and that the circuit is rated for 30 A at 125 V. The cord uses a male L5-30P plug and a female L5-30R connector, so both ends must match your equipment and supply. The black SJTW jacket helps identify the circuit in a coloured-coded rack layout.

Fits standard locking rack power chains

The male-to-female configuration extends or completes a locking power chain between a PDU or wall outlet and a server power supply. Three-conductor grounded copper meets UL Listed and CSA certified requirements (file E210037) and is RoHS compliant. The twist-lock design frees you from accidental disconnects in high-vibration rack environments.

Highlights

  • Twist-lock L5-30P to L5-30R prevents accidental disconnection in racks
  • Heavy-duty 10 AWG copper handles 30A at 125V for demanding equipment
  • SJTW jacket rated 105C and 300V withstands harsh data-centre conditions
  • UL Listed and CSA certified (file E210037) confirms safety compliance
  • Black jacket enables quick circuit identification in dense rack environments

Specifications

TypePower
ColorBlack
Length6 ft.
Terminal GenderMale to Female
Wire Gauge10 AWG

Questions about this item

Does the cord come with any extra adapters or mounting hardware, or is it just the 6 ft L5-30P to L5-30R cable?

Only the 6 ft black locking power cord with NEMA L5-30P plug and L5-30R connector is supplied; no adapters or brackets are included.

The gauge guide lists 18, 16, 14 and 12 AWG for lower amperages — why choose the 10 AWG version instead?

10 AWG is rated for 30 A at 125 V, so it supports the full L5-30 rating where 12 AWG stops at 20 A and smaller gauges handle even less.

What does the 30 A / 125 V rating mean when the cord is plugged into a live PDU in a rack?

It means the 10 AWG SJTW cable can continuously carry 30 A at 125 V without exceeding its 105 °C temperature rating, and the twist-lock ends stay secure under vibration.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.