We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red 5 ft C14 to C15 heavy duty power cord with 14 AWG SJT jacket

Cable Leader

Cable Leader 5ft C14 to C15 Heavy Duty PDU Power Cord 14 AWG 15A 250V Red

SKU CH-ESV5-AYCTM

A 5 ft heavy-duty jumper with a C14 plug and high-temp C15 connector, 14 AWG rated 15A at 250V for rack PDUs and hot equipment

  • ColorRed
  • Length5 - 10 ft.
  • Connector Number2
  • Wire Gauge14 AWG
  • C14-to-C15 jumper powers high-temp gear from a rack PDU
  • Notched C15 connector fits C16 inlets on hot-running network switches
  • 14 AWG SJT copper rated 15A 250V handles server-grade loads
  • Red jacket enables instant circuit identification in dense racks
  • UL Listed and CSA certified (file E210037) with RoHS compliance

5 ft C14-C15 PDU jumper for hot gear

This red 5 ft cord connects a rack PDU or C13/C14 outlet to equipment that uses a high-temperature C16 inlet. The notched C15 end is the IEC 60320 higher-temperature connector specified for network switches and other devices that run hot. It is built with 14 AWG copper and an SJT jacket rated 105C / 300V.

Sustained 15 A / 250 V load handling

The 14 AWG construction is rated for continuous 15 A at 250 V, matching the higher-draw tier in the gauge guide above 13 A and below 20 A. The SJT jacket maintains its 105C rating under steady server or PDU loads without the derating seen on lighter cords. UL Listing and CSA certification (file E210037) confirm the rating for constant operation.

Verify C16 inlet and PDU outlet before ordering

Confirm the target device has a C16 inlet — the notched C15 plug will not seat in a standard C14 inlet used by most PCs. Also check that your rack PDU or power strip presents a C13/C14 outlet for the C14 plug. The red jacket helps circuit identification but does not change electrical compatibility.

Highlights

  • C14-to-C15 jumper powers high-temp gear from a rack PDU
  • Notched C15 connector fits C16 inlets on hot-running network switches
  • 14 AWG SJT copper rated 15A 250V handles server-grade loads
  • Red jacket enables instant circuit identification in dense racks
  • UL Listed and CSA certified (file E210037) with RoHS compliance

Specifications

BrandGENERIC
ColorRed
Length5 - 10 ft.
Connector Number2
Wire Gauge14 AWG

Questions about this item

Does the 14 AWG SJT cable run hot when it carries 15 A all day?

The SJT jacket is rated for 105 °C continuous operation, so the cord handles its full 15 A / 250 V rating without overheating.

What must my rack PDU or outlet provide for the C14 plug to connect?

A standard IEC 60320 C13 or C14 socket — the C14 plug on this cord inserts directly into any C13 outlet or C14 inlet.

Will the notched C15 connector fit the C16 inlet on my older network switch?

Yes — the C15 is the high-temperature mate for a C16 inlet, so it plugs straight into legacy gear that uses the C16 socket.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.