We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 5 ft IEC C14 to C13 power extension cord with SJT jacket

Cable Leader

Cable Leader 5 ft IEC C14 to C13 Power Extension Cord 16 AWG 13A 250V Black

SKU CH-WJ31-DF90M

Extends C14 to C13 power connections by five feet with 16 AWG, 13A, 250V SJT cable, UL Listed and CSA certified

  • ColorBlack
  • Length5 - 10 ft.
  • Connector Number2
  • Wire Gauge16 AWG
  • Extends C14-to-C13 reach without extra adapters
  • 16 AWG copper handles 13 A at 250 V
  • SJT jacket rated 105 °C and 300 V
  • UL Listed and CSA certified, file E210037
  • Black jacket simplifies rack circuit identification

Cable Leader 5 ft C14 to C13 Extension

This 5 ft power extension cord adds reach between a C14 inlet on a PDU, UPS or server and an existing C13 power cord. It uses a male IEC 60320 C14 plug and a female C13 socket to bridge the gap without adapters. The black SJT jacket helps identify circuits in a rack.

Suits rack builds needing extra length

Installers who need a longer C14 to C13 run for servers, switches or AV gear will find the 16 AWG, 13A / 250V rating suitable for typical rack loads. Buyers who need a heavier gauge for 15A or 20A equipment should look at 14 AWG or 12 AWG cords instead.

Fits standard IEC 60320 rack power chains

The cord plugs directly into a C14 outlet on a PDU or UPS and accepts any standard C13 connector from your device. Its UL Listed and CSA certified construction (file E210037) meets data-centre safety requirements. The 105C / 300V cable rating handles normal operating temperatures.

Highlights

  • Extends C14-to-C13 reach without extra adapters
  • 16 AWG copper handles 13 A at 250 V
  • SJT jacket rated 105 °C and 300 V
  • UL Listed and CSA certified, file E210037
  • Black jacket simplifies rack circuit identification

Specifications

BrandGENERIC
ColorBlack
Length5 - 10 ft.
Connector Number2
Wire Gauge16 AWG

Questions about this item

What must my equipment already have to use this IEC 60320 C14-to-C13 extension?

Your power source needs a C13 outlet — typical on PDUs and UPS units — and your device cord must end in a C14 plug so it seats in the female C13 socket on this cord.

Will the 16 AWG, 13A rating still protect my older 18 AWG, 10A cords if I chain them?

The extension is rated for 13A at 250V, so it will not limit an 18 AWG cord rated for 10A; the lower-rated cord remains the bottleneck and its own fuse or breaker governs safety.

How can I confirm the cord is carrying power correctly after I plug it in?

The connected server, switch or AV gear powers on normally; the SJT jacket stays cool to the touch under load and the UL/CSA markings (file E210037) verify the build meets the 105C, 300V cable rating.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.