We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red 5 ft heavy duty power extension cord with IEC C14 male plug and C13 female socket, SJT jacket

Cable Leader

Cable Leader 5 ft IEC C14 to C13 Heavy Duty Power Extension Cord 14 AWG 15A 250V Red

SKU CH-6RP9-JGR23

A 5 ft red IEC C14-to-C13 extension cord, 14 AWG rated for 15A at 250V with UL and CSA certification

  • ColorRed
  • Length5 - 10 ft.
  • Connector Number2
  • Wire Gauge14 AWG
  • Extends C14/C13 power reach with male-to-female IEC 60320 connectors
  • Heavy-duty 14 AWG copper handles 15A at 250V for server loads
  • SJT jacket rated 105C and 300V withstands data-centre heat
  • Red colour enables instant circuit tracing in dense racks
  • UL Listed and CSA certified (file E210037) plus RoHS compliant

Red jacket for rack tracing

The red SJT jacket lets technicians identify circuits and phases at a glance in dense server racks. Colour coding reduces the chance of pulling the wrong cord during maintenance. The extension adds reach between a PDU or UPS and existing equipment without extra adapters. It suits installers who need visual cable management in data-centre environments.

14 AWG rating extends usable load

The 14 AWG copper conductors raise the continuous rating to 15 A at 250 V, so the cord can serve servers, switches and higher-draw AV gear rather than only light electronics. UL listing and CSA certification (file E210037) confirm the construction meets North American safety requirements. RoHS compliance means restricted substances are absent. Buyers needing 20 A capacity must choose a 12 AWG cord instead.

IEC 60320 C14 to C13 limits

The male C14 plug and female C13 socket follow the IEC 60320 standard used on rack PDUs, UPS units and many servers. The five-foot length adds modest reach but cannot span full rack heights or cross-aisle runs. The SJT jacket is rated to 105 °C and 300 V, so it handles typical cabinet temperatures. The cord does not convert voltage or provide surge protection.

Highlights

  • Extends C14/C13 power reach with male-to-female IEC 60320 connectors
  • Heavy-duty 14 AWG copper handles 15A at 250V for server loads
  • SJT jacket rated 105C and 300V withstands data-centre heat
  • Red colour enables instant circuit tracing in dense racks
  • UL Listed and CSA certified (file E210037) plus RoHS compliant

Specifications

BrandGENERIC
ColorRed
Length5 - 10 ft.
Connector Number2
Wire Gauge14 AWG

Questions about this item

Will the 14 AWG copper conductors or SJT jacket need replacement after years in a hot rack?

The cord is rated 105C / 300V and UL Listed (file E210037); under normal server loads the heavy-duty 14 AWG construction is designed for the life of the installation.

What is the first limit reached when the cord runs at full 15 A continuously?

The 15 A / 250 V rating of the 14 AWG conductors and C13/C14 connectors is the governing limit; the SJT jacket handles 105 C so thermal margin remains.

How much heat does the 5 ft red SJT cord add when powering a 15 A server load all day?

At 15 A the 14 AWG copper produces modest resistive heat; the 105 C jacket rating and UL/CSA certification confirm it stays within safe limits for continuous rack use.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.