We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 3 ft power cord with NEMA 6-20P plug and C13 connector, SJT jacket

Cable Leader

Cable Leader 3ft NEMA 6-20P to C13 14 AWG 15A 250V Black computer power cord

SKU CH-AQJJ-QEDCK

Heavy-duty 14 AWG cord connects servers and PDUs to 208/240V outlets with a NEMA 6-20P plug and C13 connector, rated 15A/250V and UL listed

  • TypePower
  • ColorBlack
  • Length3 ft.
  • Terminal GenderMale to Female
  • Wire Gauge14 AWG

Length 3ft

  • Connects servers and PDUs to 208/240V outlets via NEMA 6-20P plug
  • Heavy-duty 14 AWG copper handles 15A at 250V with SJT jacket
  • True 3-wire grounded design with molded connectors and strain relief
  • Safety certified UL Listed and CSA certified file E210037, RoHS compliant
  • 3 ft length suits rack and equipment cabinet installations

3 ft NEMA 6-20P to C13 Power Cord

This 3 ft black power cord connects servers, PDUs and 250 V equipment to a 208/240 V outlet. It uses a NEMA 6-20P plug on one end and a C13 connector on the other. The cable is built with 14 AWG, 3-conductor grounded copper inside an SJT jacket rated 105 °C / 300 V. It carries UL and CSA certification (file E210037) and is RoHS compliant.

Suits 250 V gear needing a C13 inlet.

This cord suits administrators wiring servers, switches or PDUs that have a C13 power inlet and run on 208/240 V circuits. The 14 AWG gauge supports up to 15 A at 250 V. It will not fit devices that require a C14 inlet or a different plug type, and it is not intended for low-voltage only equipment.

14 AWG gauge rated 15 A at 250 V

The single specification that decides fit is the 14 AWG conductor rated for 15 A at 250 V. This gauge handles higher-draw equipment such as servers and PDUs on 208/240 V circuits. Thinner 16 AWG or 18 AWG cords are rated for lower current and would not meet the same load requirement.

Highlights

  • Connects servers and PDUs to 208/240V outlets via NEMA 6-20P plug
  • Heavy-duty 14 AWG copper handles 15A at 250V with SJT jacket
  • True 3-wire grounded design with molded connectors and strain relief
  • Safety certified UL Listed and CSA certified file E210037, RoHS compliant
  • 3 ft length suits rack and equipment cabinet installations

Specifications

TypePower
ColorBlack
Length3 ft.
Terminal GenderMale to Female
Wire Gauge14 AWG

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 14 AWG SJT jacket run cooler than a thinner cord when the cord carries 15 A all day?

The 14 AWG copper and 105 °C SJT rating are sized for continuous 15 A at 250 V, so the cord stays within its thermal limits under full load.

What must the site already have for the NEMA 6-20P plug to work?

A 208/240 V outlet wired to a 20 A circuit with a NEMA 6-20R receptacle.

Will the C13 end fit the C14 inlet on my older server or PDU?

Yes, the C13 connector mates with any standard C14 inlet on existing equipment.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.