We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 3 ft figure-8 power cord with two-prong plug and C7 connector

Cable Leader

Cable Leader 3ft NEMA 1-15P to IEC C7 Figure-8 AC Power Cord 18 AWG Black

SKU CH-6WMR-PCC97

A 3 ft figure-8 power cord with NEMA 1-15P plug and IEC 60320 C7 connector, 18 AWG SJT jacket rated 105C / 300V for laptop adapters and electronics

  • ColorBlack
  • Length36" - 40"
  • Connector Number2
  • Wire Gauge18 AWG

Length 3ft

  • 1ft
  • 3ft
  • 6ft

Struck-through versions exist but are not stocked here.

  • NEMA 1-15P to IEC 60320 C7 figure-8 connector fits laptop power bricks and printers
  • Non-polarized 2-prong design works with double-insulated electronics using a standard C7 inlet
  • 18 AWG copper with SJT jacket rated 105C and 300V handles up to 10A for light electronics
  • 36–40 inch length gives flexible placement for notebooks, adapters and other C7 devices
  • Built by Cable Leader with US-based support and a lifetime replacement promise

Purpose and fit

The Cable Leader cord replaces a missing or damaged figure-8 lead for laptop power bricks, printers and other double-insulated electronics that use an IEC 60320 C7 inlet. It plugs into a standard NEMA 1-15P wall outlet with a non-polarised two-prong design.

Build integration

The 18 AWG copper conductors inside an SJT jacket are rated 105C and 300V, supporting up to 10A for light-duty equipment. The three-foot length keeps the power brick close to the wall without excess slack, freeing desk space and reducing cable clutter around the adapter.

Who should buy

Buyers needing a direct replacement for a C7-equipped notebook charger or printer will find the correct connector and gauge here. Builders who need a polarised plug, a longer reach, or a heavier gauge for higher-draw devices such as servers or PDUs should look at alternative cords.

Highlights

  • NEMA 1-15P to IEC 60320 C7 figure-8 connector fits laptop power bricks and printers
  • Non-polarized 2-prong design works with double-insulated electronics using a standard C7 inlet
  • 18 AWG copper with SJT jacket rated 105C and 300V handles up to 10A for light electronics
  • 36–40 inch length gives flexible placement for notebooks, adapters and other C7 devices
  • Built by Cable Leader with US-based support and a lifetime replacement promise

Specifications

BrandGENERIC
ColorBlack
Length36" - 40"
Connector Number2
Wire Gauge18 AWG

Questions about this item

What current limit does the 18 AWG wire enforce under sustained load?

The 18 AWG copper is rated for up to 10 A continuous use on light electronics.

How much heat does the SJT jacket withstand during all-day operation?

The SJT jacket is rated to 105 °C, so it handles normal equipment heat without degrading.

Which inlet must the device already have for this cord to fit?

The equipment needs an IEC 60320 C7 figure-8 inlet, the standard two-prong socket on many laptop bricks and printers.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.