We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 3-foot IEC C20 male to C19 female power extension cord, 14 AWG SJT jacket

Cable Leader

Cable Leader 3ft IEC C20 to C19 14 AWG 15A/250V Black Power Extension Cord

SKU CH-33K3-1W5YJ

Extends C20/C19 power connections with a 3 ft, 14 AWG SJT cord rated 15A/250V, UL Listed and CSA certified

  • TypeExtension Cable
  • ColorBlack
  • Length3 ft.
  • Terminal GenderMale to Female
  • Wire Gauge14 AWG
  • Extends C20/C19 power links by three feet with a male-to-female IEC 60320 connection
  • Heavy-duty 14 AWG copper carries 15A at 250V for server and PDU loads
  • SJT jacket rated 105C and 300V withstands data-centre heat and voltage stress
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for safety assurance
  • Black jacket simplifies circuit and phase tracing in dense rack installations

Rack PDU Reach Extension

This 3 ft IEC C20 to C19 cord adds length between a rack PDU, UPS or server and your existing C19 power cord. The male C20 plug and female C19 socket maintain a standard IEC 60320 connection without an adapter. It suits data-centre and server-room installs where outlet spacing demands extra reach.

Upgrade from Lighter Gauge Cords

Replaces 18 AWG cords rated to 10A or 16 AWG cords rated to 13A when equipment draws up to 15A at 250V. The 14 AWG SJT-jacketed copper handles server and PDU loads that lighter cables cannot support continuously. The jump is worth it whenever the connected gear exceeds 13A or the installation requires the 105C / 300V cable rating.

Sustained Load Behaviour

Heavy duty 14 AWG 3-conductor copper and SJT jacket are rated for 15A / 250V continuous service at 105C. UL Listed and CSA certified (file E210037) with RoHS compliance confirm the materials meet safety standards for constant rack duty. The cord delivers stable current without the voltage drop seen on thinner gauge extensions under full load.

Highlights

  • Extends C20/C19 power links by three feet with a male-to-female IEC 60320 connection
  • Heavy-duty 14 AWG copper carries 15A at 250V for server and PDU loads
  • SJT jacket rated 105C and 300V withstands data-centre heat and voltage stress
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for safety assurance
  • Black jacket simplifies circuit and phase tracing in dense rack installations

Specifications

TypeExtension Cable
ColorBlack
Length3 ft.
Terminal GenderMale to Female
Wire Gauge14 AWG

Questions about this item

Will the 3 ft length and C20/C19 connectors fit my rack PDU spacing?

The 3 ft SJT-jacketed cord adds reach between a PDU C20 outlet and your equipment C19 inlet; allow extra space for the connector bodies.

How do I install the male C20 plug and female C19 socket correctly?

Insert the male C20 fully into the PDU or UPS outlet until it seats, then plug your existing C19 cord into the female end; the step often missed is verifying both connectors lock securely.

When should I replace this 14 AWG extension cord?

Replace it if the SJT jacket shows cuts, the C20 or C19 pins are bent, or the cord feels warm under a 15A load; the 105C rating gives headroom but physical damage ends its safe life.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.