We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 36-inch Y power splitter cord with one NEMA 5-15P plug and three 5-15R outlets

Cable Leader

Cable Leader 36in NEMA 5-15P to 3x 5-15R Power Splitter Cord 14 AWG 15A/125V Black

SKU CH-1WNM-5SJC5

Splits one NEMA 5-15P outlet into three 5-15R receptacles using 14 AWG SJT cable rated 15A/125V, UL Listed and CSA certified

  • ColorBlack
  • Length36" - 40"
  • Connector Number4
  • Wire Gauge14 AWG

Length 36in

  • Power three devices from one outlet using the 1-to-3 NEMA 5-15 splitter
  • 14 AWG copper conductors handle up to 15 A at 125 V for servers and PDUs
  • SJT jacket rated 105 °C / 300 V adds durability and heat resistance
  • Fully grounded 3-wire design with moulded connectors and strain relief for safe operation
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for verified safety

Splitter cord for three devices

The Cable Leader power splitter cord connects one NEMA 5-15P plug to three NEMA 5-15R outlets, letting you run up to three pieces of equipment from a single wall socket. It is built with 14 AWG SJT-jacketed copper rated for 15 A at 125 V and carries UL and CSA certification with file E210037. The 36-inch length keeps the layout tidy for desktop PCs, monitors or rack gear.

Upgrade from lighter-gauge cords

A 14 AWG cord replaces 18 AWG or 16 AWG leads when the combined draw approaches 15 A, such as with servers, PDUs or multiple high-draw workstations. The heavier copper and 105 °C / 300 V jacket handle sustained loads that would overheat thinner wire, and the molded strain relief prevents fatigue at the Y junction.

Suits builders needing one-to-three power

This splitter suits anyone who needs three grounded outlets from one feed and stays within the 15 A total limit. It is not for installations that require 20 A circuits, longer runs beyond the supplied length, or non-NEMA plug types. Buyers who need more than three outlets or a higher ampacity should look at a different power distribution solution.

Highlights

  • Power three devices from one outlet using the 1-to-3 NEMA 5-15 splitter
  • 14 AWG copper conductors handle up to 15 A at 125 V for servers and PDUs
  • SJT jacket rated 105 °C / 300 V adds durability and heat resistance
  • Fully grounded 3-wire design with moulded connectors and strain relief for safe operation
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for verified safety

Specifications

BrandGENERIC
ColorBlack
Length36" - 40"
Connector Number4
Wire Gauge14 AWG

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What outlet spacing or clearance does the 36-inch Y-splitter with three 5-15R receptacles need?

The 36-inch SJT cord reaches 36 to 40 inches from the 5-15P plug to the three 5-15R outlets; each molded receptacle requires standard NEMA 5-15 face clearance.

How do I install the 14 AWG grounded splitter without creating a loose connection at the 5-15P plug?

Insert the 5-15P fully into the source outlet until the blades seat firmly; the molded strain relief on the 14 AWG SJT cable prevents pull-out at the Y junction.

When should I replace the 14 AWG SJT cord rated 105°C and 300V?

Replace if the black SJT jacket shows cracks, the 5-15P or 5-15R blades bend, or the cord feels warm near the 15A 125V rating limit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.