We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 30 ft heavy-duty power cord with NEMA 5-15P plug and C13 connector, SJT jacket, molded strain relief

Cable Leader

Cable Leader 30ft NEMA 5-15P to C13 14 AWG Heavy Duty Power Cord

SKU CH-0Y61-YSHWH

A 30-foot heavy-duty 14 AWG power cord with NEMA 5-15P plug and IEC C13 connector, rated 15A/125V with UL and CSA certification

  • ColorBlack
  • Length26 - 30 ft.
  • Connector Number2
  • Wire Gauge14 AWG
  • 30 ft reach powers equipment across the room
  • 14 AWG copper handles up to 15 A for servers and PDUs
  • SJT jacket rated 105 °C / 300 V withstands heat and voltage
  • UL Listed and CSA certified (file E210037) for verified safety
  • Fully grounded 3-wire design with molded strain relief prevents faults

30 ft NEMA 5-15P to C13 power cord

This 30 ft power cord connects a PC, monitor, server or printer with an IEC C13 inlet to a standard North American wall outlet, power strip or PDU. The 5-15P plug carries three grounded pins and the C13 connector fits the common equipment inlet. It is built for devices that require a 15 A / 125 V supply.

Check your outlet and device inlet before ordering

Verify that your power source provides a NEMA 5-15R receptacle and that the equipment you are powering uses a C13 inlet. The cord is rated 14 AWG for up to 15 A at 125 V with an SJT jacket rated 105 C / 300 V. Ensure the 30 ft length suits the distance between outlet and device without excess slack.

Replaces worn or undersized cords for higher-draw

Use this cord to replace a damaged factory cable or an 18 AWG lead limited to 10 A when your equipment draws up to 15 A. The 14 AWG copper construction supports servers, PDUs and other higher-draw equipment that would overload lighter cords. The jump is worth it when your current cord is rated below 15 A or shows cracked insulation.

Highlights

  • 30 ft reach powers equipment across the room
  • 14 AWG copper handles up to 15 A for servers and PDUs
  • SJT jacket rated 105 °C / 300 V withstands heat and voltage
  • UL Listed and CSA certified (file E210037) for verified safety
  • Fully grounded 3-wire design with molded strain relief prevents faults

Specifications

BrandGENERIC
ColorBlack
Length26 - 30 ft.
Connector Number2
Wire Gauge14 AWG

Questions about this item

Does the 30 ft cord include both the NEMA 5-15P plug and C13 connector, or do I need a separate adapter?

The cord is a single 30 ft assembly with a molded NEMA 5-15P plug on one end and a molded C13 connector on the other — nothing else is required.

When should I choose this 14 AWG version instead of an 18 AWG or 16 AWG cord?

Use 14 AWG for equipment drawing up to 15 A such as servers or PDUs; 16 AWG covers up to 13 A for typical computers; 18 AWG is limited to 10 A for lighter electronics.

What does the 15 A / 125 V rating mean when the cord is powering a server or workstation?

The 14 AWG copper conductors and SJT jacket are rated for continuous 15 A at 125 V, so the cord safely delivers full rated current to high-draw equipment without overheating.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.