Cable Leader
Cable Leader 2ft NEMA 5-15P to C15 14AWG 15A 125V Red Power Extension Cord
A 2 ft heavy-duty 14 AWG extension cord with a NEMA 5-15P plug and IEC C15 connector, rated 15 A at 125 V and UL listed for PCs, monitors and servers
- FeaturesThis 2ft power extension cord is made by Cable Leader and fe
- Heavy-duty 14 AWG copper handles 15 A server loads
- NEMA 5-15P to IEC 60320 C15 fits PCs, monitors and PDUs
- UL Listed and CSA certified (file E210037) for safety
- SJT jacket rated 105 °C / 300 V resists heat and wear
- Fully molded 3-wire grounded design with strain relief protects connections
2 ft NEMA 5-15P to C15 Power Cord
This two-foot power extension cord connects a wall outlet, power strip or PDU to equipment with an IEC 60320 C15 inlet. It suits PCs, monitors, servers, printers and similar devices that require a grounded AC supply. The red SJT jacket provides visible identification in dense cable runs.
14 AWG 15 A Rating Determines Suitability
The cord uses 14 AWG three-conductor copper rated for 15 amps at 125 volts, with a 105 °C and 300 V cable rating. This gauge supports higher-draw equipment such as servers and PDUs where 16 AWG or 18 AWG cords would be insufficient. Builders needing a 10 A or 13 A cord for lighter loads should select a different gauge.
UL Listed CSA Certified with Lifetime Replacement
Safety certifications include UL Listing and CSA certification under file E210037, plus RoHS compliance. Molded connectors with strain relief deliver a fully grounded three-wire design that resists accidental disconnection. The manufacturer provides a lifetime replacement warranty handled by the US-based brand.
Highlights
- Heavy-duty 14 AWG copper handles 15 A server loads
- NEMA 5-15P to IEC 60320 C15 fits PCs, monitors and PDUs
- UL Listed and CSA certified (file E210037) for safety
- SJT jacket rated 105 °C / 300 V resists heat and wear
- Fully molded 3-wire grounded design with strain relief protects connections
Specifications
| Brand | Cable Leader |
|---|---|
| Features | This 2ft power extension cord is made by Cable Leader and features a style with material. It supports a voltage of 125.00 volts and an input current of 15 amps. The cable is in color and is UL listed. It comes with a Female-to-Male connector and does not require batteries. |
Questions about this item
Will the 15 A / 125 V rating actually handle a server that draws near 15 amps?
The 14 AWG SJT cable is rated for 15 A continuous at 125 V, matching the NEMA 5-15P plug limit, so it will carry the full load without overheating.
Does the C15 connector work with a standard C14 inlet on my PC power supply?
No — the C15 connector is keyed for high-temperature C16 inlets (105 °C rating) and will not mate with a C14 inlet.
How much clearance do the moulded connectors need behind the equipment?
The fully moulded 5-15P plug and C15 connector each add depth behind the outlet and device inlet; allow enough rear space for both moulded ends and the strain-relief boots.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



