We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Cable Leader

Cable Leader 2ft NEMA 5-15P to 2x 5-15R Power Splitter Cord 16 AWG 13A 125V Black

SKU CH-8XQ5-G5XWE

A 2 ft Y-splitter with one 5-15P plug and two 5-15R sockets, 16 AWG SJT cable rated 13 A at 125 V, UL Listed and CSA certified

  • ColorBlack
  • Length21" - 25"
  • Connector Number3
  • Wire Gauge16 AWG

Length 2ft

  • Powers two devices from one outlet using a single 5-15P input and dual 5-15R outputs
  • 16 AWG SJT cable rated 13A at 125V handles computers and monitors safely
  • Space-saving Y design splits one feed into two for tidy desk or rack setups
  • Fully grounded three-wire construction with moulded connectors and strain relief for secure connections
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for verified safety

2 ft NEMA 5-15P to 2x 5-15R Splitter

This 2 ft power splitter cord provides one NEMA 5-15P input and two NEMA 5-15R outputs. It is built with 16 AWG SJT-jacketed 3-conductor grounded copper rated for 13A at 125V. The cord is UL Listed and CSA certified with file E210037 and is RoHS compliant. It suits users who need to power two devices from a single wall outlet.

Check your outlet and total load

Verify that the source outlet is a standard NEMA 5-15R receptacle rated for at least 13A. Confirm that the combined current draw of both connected devices does not exceed 13A at 125V. Ensure each device uses a NEMA 5-15P plug. The cable length is between 21 and 25 inches, so measure the distance to your equipment before ordering.

Suits dual-device setups; not for higher loads

This splitter suits desktop PCs, monitors and office equipment that stay within the 13A limit. Builders who need to power servers, PDUs or heavy-duty equipment drawing more than 13A should look at a heavier-gauge cord. Users who require more than two outlets from one feed should consider a different power distribution solution.

Highlights

  • Powers two devices from one outlet using a single 5-15P input and dual 5-15R outputs
  • 16 AWG SJT cable rated 13A at 125V handles computers and monitors safely
  • Space-saving Y design splits one feed into two for tidy desk or rack setups
  • Fully grounded three-wire construction with moulded connectors and strain relief for secure connections
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for verified safety

Specifications

BrandGENERIC
ColorBlack
Length21" - 25"
Connector Number3
Wire Gauge16 AWG

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the cord come with everything needed to power two devices from one outlet, or do I need extra adapters?

The splitter has a single 5-15P plug and two 5-15R receptacles built in, so no extra adapters are required to connect two standard devices.

The listing mentions 16 AWG — how do I know if that gauge suits my equipment versus 14 AWG or 18 AWG?

16 AWG is rated for up to 13 A at 125 V, making it appropriate for typical PCs and monitors; 18 AWG handles only 10 A for lighter electronics, while 14 AWG supports 15 A for servers or PDUs.

What does the 13 A / 125 V rating mean when I plug a PC and a monitor into the two outputs at the same time?

The combined draw of both devices must stay within 13 A at 125 V; the cord’s 16 AWG SJT cable and UL/CSA certification (file E210037) guarantee that limit is met safely.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.