We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 2 ft heavy-duty power extension cord with C14 male plug and C13 female socket, 14 AWG SJT jacket

Cable Leader

Cable Leader 2ft IEC C14 to C13 Heavy Duty Power Extension Cord 14 AWG 15A 250V Black

SKU CH-JR92-CWZXV

A heavy-duty 14 AWG IEC C14 to C13 extension cord adds 2 ft of reach for 15 A server and PDU loads

  • ColorBlack
  • Length21" - 25"
  • Connector Number2
  • Wire Gauge14 AWG
  • Extends C14/C13 reach with male-to-female IEC 60320 connectors
  • Heavy-duty 14 AWG copper handles 15A at 250V for server loads
  • SJT jacket rated 105C and 300V protects conductors in rack environments
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for safety
  • Black jacket enables color-coded circuit tracing across rack and PDU gear

IEC C14 to C13 power extension

This two-foot cord extends the reach between a rack PDU, UPS or server and an existing C13-terminated power cord. The male C14 plug connects to the power source while the female C13 socket accepts the equipment cord, removing the need for an adapter. Heavy-duty 14 AWG copper conductors with an SJT jacket are rated for 15 amps at 250 volts and 105 °C.

Who this suits and who it does not

Server and network administrators who need extra length inside a rack will find the cord matches standard IEC 60320 C14/C13 ports used on switches, servers and AV gear. The black jacket helps trace circuits and phases at a glance. Installations that require a different connector type, a higher amperage rating or a longer run should select a cable specified for those needs.

Deciding specification

The 14 AWG gauge sets the safe continuous capacity at 15 amps, making the cord appropriate for server and PDU loads rather than lighter office equipment. UL Listing and CSA certification (file E210037) confirm compliance with North American safety standards, and the RoHS mark indicates restricted-substance compliance.

Highlights

  • Extends C14/C13 reach with male-to-female IEC 60320 connectors
  • Heavy-duty 14 AWG copper handles 15A at 250V for server loads
  • SJT jacket rated 105C and 300V protects conductors in rack environments
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for safety
  • Black jacket enables color-coded circuit tracing across rack and PDU gear

Specifications

BrandGENERIC
ColorBlack
Length21" - 25"
Connector Number2
Wire Gauge14 AWG

Questions about this item

What clearance does the 21 to 25 inch cord and its C14 and C13 connectors need in a server rack?

The 21 to 25 inch length and standard IEC 60320 C14 plug and C13 socket fit typical PDU and server spacing; allow room for the SJT jacket bend radius.

How do you install the C14 to C13 extension and what step is often missed?

Plug the male C14 end into the PDU or UPS and the female C13 end into your device cord; the step often missed is verifying the 15A 250V rating matches the load.

When should the 14 AWG SJT extension cord be replaced?

Replace if the jacket shows cracking, the connectors become loose, or the cord exceeds its 105C temperature rating during use.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.