We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 2 ft C14 to 5-15R power extension cord with moulded grounded plugs and SJT jacket

Cable Leader

Cable Leader 2ft C14 to 5-15R Power Extension Cord 18 AWG 10A 125V Black

SKU CH-C8FN-CPE5W

Extends a C14 device cord to a standard 5-15R outlet with 18 AWG grounded copper rated 10A at 125V, UL Listed for indoor use

  • ColorBlack
  • Length21" - 25"
  • Connector Number2
  • Wire Gauge18 AWG

Length 2ft

Struck-through versions exist but are not stocked here.

  • Adds 2 ft reach to C14 devices for wall or strip access
  • 18 AWG copper handles 10 A at 125 V for light electronics
  • True 3-wire grounded design with molded plugs and strain relief
  • Indoor-rated SJT jacket suits offices, labs, workshops and homes
  • UL Listed and CSA certified (file E210037), RoHS compliant

Power Extension Cord for Indoor Equipment

The Cable Leader 2 ft C14 to 5-15R extension cord adds reach between a standard three-prong outlet, power strip or surge protector and the power cord of a computer, monitor or other indoor device. It uses an 18 AWG SJT-jacketed cable rated for 10A at 125V with a fully grounded three-wire design.

Check Your Existing Cord and Outlet

Verify that the equipment you plan to connect uses a C14 inlet so the cord's 5-15R outlet will accept it. Confirm the wall outlet or strip is a standard 5-15R receptacle and that the total draw of the connected device does not exceed 10A at 125V. This cord is indoor-rated only; do not use it in wet or outdoor locations.

Integrates with Standard Power Chains

The molded C14 plug inserts into any 5-15R outlet, strip or surge protector while the 5-15R outlet receives your existing device cord, extending the reach by roughly two feet. The SJT jacket and strain-relief mouldings withstand routine office, lab or workshop handling. It frees you from rearranging furniture when the nearest outlet is just out of range.

Highlights

  • Adds 2 ft reach to C14 devices for wall or strip access
  • 18 AWG copper handles 10 A at 125 V for light electronics
  • True 3-wire grounded design with molded plugs and strain relief
  • Indoor-rated SJT jacket suits offices, labs, workshops and homes
  • UL Listed and CSA certified (file E210037), RoHS compliant

Specifications

BrandGENERIC
ColorBlack
Length21" - 25"
Connector Number2
Wire Gauge18 AWG

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What connectors come on the cord and do I need any extra parts to use it?

The cord has a C14 plug on one end and a 5-15R outlet on the other — nothing else is required to extend a standard 3-prong device cord.

Which wire gauge should I pick for my equipment?

Choose 18 AWG for light electronics up to 10A, 16 AWG for computers up to 13A, 14 AWG for servers or PDUs up to 15A, and 12 AWG for heavy-duty 20A gear.

What does the 10A 125V rating mean when I plug this into my workstation?

It means the cord safely delivers up to 10 amps at 125 volts for typical office or lab equipment — do not exceed that load.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.