We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 2 ft power cord with NEMA 5-15P plug and C13 connector

Cable Leader

Cable Leader 2 ft NEMA 5-15P to C13 14 AWG 15A 125V White computer power cord

SKU CH-5BV1-0X0SR

A 2 ft heavy-duty 14 AWG power cord with NEMA 5-15P to C13 connectors, rated 15A/125V and UL listed for computers and servers

  • ColorWhite
  • Length21" - 25"
  • Connector Number2
  • Wire Gauge14 AWG
  • Heavy-duty 14 AWG copper handles up to 15A for servers and high-draw equipment
  • SJT jacket rated 105°C / 300V withstands heat and voltage in demanding environments
  • True 3-wire grounded design with molded strain relief protects against shock and cable fatigue
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for verified safety
  • 2 ft white cord with NEMA 5-15P to IEC 60320 C13 fits PCs, monitors and most IEC-inlet gear

What it connects

This two-foot power cord carries a NEMA 5-15P plug on one end and an IEC 60320 C13 connector on the other. It links a computer, monitor, server, printer or any device with a C13 inlet to a wall outlet, power strip or PDU. The white SJT-jacketed cable uses 14 AWG grounded copper rated for 15 amps at 125 volts.

Installing it

Push the 5-15P plug fully into the mains socket until the blades seat, then insert the C13 end into the equipment inlet until it clicks. The molded connectors and built-in strain relief keep the joint secure. A loose fit on either side can cause intermittent power, so verify both ends are fully engaged before switching on the load.

Who it suits

Buyers needing a short, heavy-duty replacement cord for servers, PDUs or other 15-amp gear will find the 14 AWG rating appropriate. It is not for equipment that requires a 20-amp circuit or a different inlet type, nor for runs where a longer reach is necessary.

Highlights

  • Heavy-duty 14 AWG copper handles up to 15A for servers and high-draw equipment
  • SJT jacket rated 105°C / 300V withstands heat and voltage in demanding environments
  • True 3-wire grounded design with molded strain relief protects against shock and cable fatigue
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for verified safety
  • 2 ft white cord with NEMA 5-15P to IEC 60320 C13 fits PCs, monitors and most IEC-inlet gear

Specifications

BrandGENERIC
ColorWhite
Length21" - 25"
Connector Number2
Wire Gauge14 AWG

Questions about this item

How do I confirm the cord is delivering full 15 A after I plug it in?

The cord is UL Listed and CSA certified (file E210037) with a 14 AWG, 15 A / 125 V rating; a secure fit on both the NEMA 5-15P plug and the IEC 60320 C13 connector indicates it is working as intended.

What comes in the box and do I need anything else?

The box contains the 2 ft white power cord with a molded NEMA 5-15P plug on one end and a C13 connector on the other; no additional parts are required for a standard PC, monitor or server with an IEC inlet.

Which gauge should I choose for a server that draws up to 15 A?

Select the 14 AWG version — it supports up to 15 A at 125 V, while 16 AWG is limited to 13 A and 18 AWG to 10 A.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.