We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Cable Leader

Cable Leader 15ft NEMA 6-15P to C13 14 AWG SJT 15A 250V Computer Power Cord

SKU CH-91B1-0W8RC

Heavy-duty 14 AWG SJT cord links 250 V servers and PDUs to 208/240 V outlets with a NEMA 6-15P plug and C13 connector, UL Listed and CSA certified

  • TypePower
  • ColorBlack
  • Length15 ft.
  • Terminal GenderMale to Female
  • Wire Gauge14 AWG

Length 15ft

  • 15 ft reach connects rack gear to 208/240 V outlets
  • 14 AWG copper handles 15 A continuous server loads
  • SJT jacket rated 105 °C / 300 V resists heat and abrasion
  • UL Listed and CSA certified (file E210037) for code compliance
  • Molded 3-wire grounded plugs with strain relief prevent accidental disconnects

Heavy-duty server cord

This 15 ft power cord uses a NEMA 6-15P plug and a C13 connector to link servers, PDUs and 250 V equipment to 208/240 V outlets. The 14 AWG SJT cable carries 15 A at 250 V with a 105 °C, 300 V jacket rating. Molded connectors and strain relief protect the fully grounded three-wire design. UL Listed and CSA certified to file E210037 with RoHS compliance.

Replaces lighter gauge leads

Swapping an 18 AWG cord rated for 10 A or a 16 AWG cord rated for 13 A for this 14 AWG, 15 A cord is worth it when your server, switch or PDU draws more current than the lighter cable can safely supply. The heavier copper reduces voltage drop on longer runs to rack-mounted gear. It is not for devices that only accept a C14 inlet or a 5-15P wall plug.

Fits standard rack power

The C13 end mates with the common C14 inlet found on most rackmount power supplies and PDUs, while the 6-15P plug seats in a matching 208/240 V receptacle. The 15 ft length spans floor-mounted PDUs to mid-rack equipment without excess slack. The SJT jacket resists oil and abrasion in dense cable trays. No adapter is included for other outlet types.

Highlights

  • 15 ft reach connects rack gear to 208/240 V outlets
  • 14 AWG copper handles 15 A continuous server loads
  • SJT jacket rated 105 °C / 300 V resists heat and abrasion
  • UL Listed and CSA certified (file E210037) for code compliance
  • Molded 3-wire grounded plugs with strain relief prevent accidental disconnects

Specifications

TypePower
ColorBlack
Length15 ft.
Terminal GenderMale to Female
Wire Gauge14 AWG

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the NEMA 6-15P plug fit a standard 208/240V outlet?

Yes, the 6-15P plug is designed for 208/240V receptacles rated up to 15A.

How do I install the cord without stressing the connectors?

Push each moulded end straight in until it seats; the built-in strain relief prevents cable pull-out if you route with a gentle loop.

When should I replace this 14 AWG cord?

Inspect the SJT jacket and moulded ends yearly; replace if you see cracking, discoloration or loose pins.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.