We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Cable Leader

Cable Leader 15ft NEMA 5-15P to C13 14 AWG SJT 15A 125V Black power extension cord

SKU CH-S83A-FDQNB

A 15 ft heavy-duty power extension cord with a NEMA 5-15P plug and IEC C13 connector, rated 15 A at 125 V using 14 AWG SJT cable, UL and CSA certified

  • FeaturesThis 15 ft power extension cord is made by Cable Leader and
  • 15 ft reach powers distant equipment
  • 14 AWG copper handles 15 A at 125 V
  • SJT jacket rated 105 °C and 300 V
  • UL Listed and CSA certified for safety
  • Molded connectors with strain relief stay secure

15 ft NEMA 5-15P to C13 extension

This 15-foot power extension cord connects a standard NEMA 5-15P plug to an IEC 60320 C13 inlet, adding reach for PCs, monitors, servers, printers and most IEC-equipped devices. The heavy-duty 14 AWG SJT jacket encloses three grounded copper conductors rated for 15 amps at 125 volts. UL listed, CSA certified and RoHS compliant, it ships new with molded connectors and strain relief.

Replaces short or damaged factory cords

It upgrades from the short IEC leads shipped with many power supplies or monitors when the wall outlet sits farther away than the stock cable allows. The jump is worth it whenever a 6-foot or 10-foot cord leaves the connector under tension or forces equipment into an awkward position. Builders who need a hospital-grade NEMA plug or a right-angle C13 inlet will not be served by this straight connector design.

14 AWG handles 15 A continuous load

At 14 AWG the cord comfortably carries the full 15 A rating for typical desktop, workstation or rack-mount gear drawing up to the circuit limit. It runs out when the load exceeds 15 A or when the installation demands a thicker 12 AWG conductor for voltage-drop reasons over longer runs. The 105 °C / 300 V SJT insulation also suits warmer equipment bays where lighter 16 AWG or 18 AWG leads would degrade faster.

Highlights

  • 15 ft reach powers distant equipment
  • 14 AWG copper handles 15 A at 125 V
  • SJT jacket rated 105 °C and 300 V
  • UL Listed and CSA certified for safety
  • Molded connectors with strain relief stay secure

Specifications

BrandCable Leader
FeaturesThis 15 ft power extension cord is made by Cable Leader and features a 14 AWG style with material. It supports a voltage of 125.00 volts and an input current of 15 amps. The cable is in color and is UL listed. It comes with a Male-to-Female connector and does not require batteries.

Questions about this item

Will the NEMA 5-15P hospital-grade plug fit a standard North American wall outlet?

Yes, the three-prong NEMA 5-15P plug fits any standard 125 V North American receptacle while providing a grounded connection.

Which end do I connect first when installing this cord, and what mistake should I avoid?

Plug the C13 end into the device inlet first, then insert the NEMA 5-15P into the wall outlet; do not force the C13 connector upside down as it is keyed.

How can I tell when this 14 AWG SJT cord needs replacement?

Replace the cord if the black SJT jacket shows cuts, cracking, or melted areas, or if the molded strain relief on either connector becomes loose.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.