We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 15 ft power cord with NEMA 5-15P plug and C13 connector, 12 AWG SJT jacket

Cable Leader

Cable Leader 15ft NEMA 5-15P to C13 12 AWG 10A 125V SJT Black

SKU CH-VN0K-A1XMC

Heavy-duty 12 AWG SJT cord with NEMA 5-15P to C13 connectors, rated 10A/125V and UL/CSA certified for safe equipment power

  • ColorBlack
  • Length11 - 15 ft.
  • Connector Number2
  • Wire Gauge12 AWG

Length 15ft

  • Heavy-duty 12 AWG copper handles up to 20 A for demanding equipment
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for verified safety
  • Fully grounded 3-wire design with molded connectors and strain relief protects against faults
  • Universal C13 connector fits PCs, monitors, servers, printers and most IEC-inlet gear
  • 15 ft SJT jacket rated 105 °C / 300 V gives flexible, durable reach

What This Cord Does

The Cable Leader 15ft NEMA 5-15P to C13 power cord connects a PC, monitor, server or printer to a standard wall outlet, power strip or PDU. A 3-prong plug goes into the mains; the C13 end fits the equipment inlet. Heavy-duty 12 AWG copper with an SJT jacket is rated 10A at 125V and carries a 105C, 300V cable rating.

Who It Suits

Builders replacing a worn cord or wiring rack gear that draws up to 10 amps on a 125V circuit will find the gauge and grounding a direct match. The UL Listed and CSA certified design (file E210037) plus RoHS compliance satisfies most corporate and lab safety requirements. Buyers whose equipment needs a 20A inlet or a higher-voltage supply should look elsewhere.

The Spec That Decides Fit

The connector pair is a NEMA 5-15P plug to an IEC 60320 C13 receptacle. If your device has a C13 inlet and your power source is a 5-15R outlet, this 15ft length with molded strain relief will seat correctly. Any other inlet type or plug standard means the cord cannot be used.

Highlights

  • Heavy-duty 12 AWG copper handles up to 20 A for demanding equipment
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for verified safety
  • Fully grounded 3-wire design with molded connectors and strain relief protects against faults
  • Universal C13 connector fits PCs, monitors, servers, printers and most IEC-inlet gear
  • 15 ft SJT jacket rated 105 °C / 300 V gives flexible, durable reach

Specifications

BrandGENERIC
ColorBlack
Length11 - 15 ft.
Connector Number2
Wire Gauge12 AWG

Other versions of this model

2 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 12 AWG SJT jacket and C13 connector fit my server PDU and rack clearance?

The C13 connector matches IEC 60320 inlets on servers, PDUs and monitors, and the 12 AWG SJT cable is 15 ft long with molded strain relief for tight rack routing.

How do I install it correctly, and what step do people skip?

Plug the NEMA 5-15P end into a grounded 125 V outlet or PDU first, then seat the C13 fully into the device inlet until the latch clicks; the skipped step is verifying the ground pin makes contact before powering on.

When should I replace this cord, and what wears out first?

Replace it if the SJT jacket shows cracks, the molded connectors loosen, or the ground continuity fails — the 105 C rating means heat cycles eventually harden the insulation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.