We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 15ft NEMA 1-15P to IEC C7 figure-8 power cord

Cable Leader

Cable Leader 15ft NEMA 1-15P to IEC C7 Power Extension Cord 18 AWG Black

SKU CH-0HB8-AN0MR

A 15 ft black extension cord with a non-polarised NEMA 1-15P plug to IEC 60320 C7 figure-8 connector, 18 AWG SJT jacket rated 125.00 V, 10 A, 105 °C / 300 V, UL listed

  • FeaturesThis 15ft power extension cord is made by Cable Leader and f
  • 15 ft reach lets you position devices away from the wall outlet
  • NEMA 1-15P to IEC C7 figure-8 connector fits laptop bricks and printers
  • 18 AWG copper with SJT jacket rated 105C and 300V
  • Non-polarised 2-prong plug suits double-insulated electronics
  • UL listed and built by Cable Leader to reliable standards

What this cord replaces

The Cable Leader 15 ft NEMA 1-15P to IEC 60320 C7 cord supplies a non-polarised figure-8 connection for laptop power bricks, notebooks, printers and other double-insulated electronics that use a C7 inlet. It is a direct replacement AC cord rated at 125.00 volts and 10 amps. The UL listed assembly uses 18 AWG copper conductors inside an SJT jacket rated for 105C and 300V.

Gauge choice and daily use

At 18 AWG the cord handles up to 10 A, which suits light electronics such as laptop adapters; heavier computers, servers or 20 A equipment need 16 AWG, 14 AWG or 12 AWG cables instead. The non-polarised 2-prong plug fits standard North American outlets without a ground pin, so it cannot serve devices that require a grounded C5 or C13 inlet.

Build and connector implications

The SJT jacket protects the copper conductors up to 105C, giving a durable feel for desk or travel use. A NEMA 1-15P plug on one end and a C7 figure-8 connector on the other mean the cord extends reach from a wall socket to the power brick without adding bulk or changing the device's own inlet. Lifetime replacement backing from the US-based brand covers failure of the cord itself.

Highlights

  • 15 ft reach lets you position devices away from the wall outlet
  • NEMA 1-15P to IEC C7 figure-8 connector fits laptop bricks and printers
  • 18 AWG copper with SJT jacket rated 105C and 300V
  • Non-polarised 2-prong plug suits double-insulated electronics
  • UL listed and built by Cable Leader to reliable standards

Specifications

BrandCable Leader
FeaturesThis 15ft power extension cord is made by Cable Leader and features a style with material. It supports a voltage of 125.00 volts and an input current of 10 amps. The cable is Black in color and is UL listed. It comes with a Male-to-Female connector and does not require batteries.

Questions about this item

Will the 18 AWG copper conductors need replacement over time?

The 18 AWG copper with SJT jacket is rated for 105C and 300V; under normal indoor use the cord itself does not require scheduled replacement.

What limits continuous use on this 10 A cord?

The 18 AWG conductors are rated for 10 A at 125.00 V; sustained loads above 10 A will trip the upstream breaker or overheat the cable.

Does the SJT jacket stay cool and quiet during all-day operation?

The cord has no moving parts and produces no noise; the 105C-rated SJT jacket handles normal operating temperatures without overheating.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.