We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red 15ft IEC C14 to C13 power extension cord with SJT jacket

Cable Leader

Cable Leader 15ft IEC C14 to C13 Power Extension Cord 14 AWG Red

SKU CH-62WR-WS3TB

A 15 ft red 14 AWG IEC C14-to-C13 extension cord rated 15 A / 250 V for server racks and PDUs, SJT jacketed, UL and CSA certified

  • ColorRed
  • Length11 - 15 ft.
  • Connector Number2
  • Wire Gauge14 AWG
  • Extends C14/C13 reach by 15 ft without adapters
  • Heavy-duty 14 AWG copper handles 15 A at 250 V
  • UL Listed and CSA certified for rack safety
  • Red jacket enables quick circuit tracing in dense racks
  • SJT jacket rated 105 °C / 300 V for server environments

Extends C14 to C13 reach

This 15 ft red extension cord adds length between a rack PDU, UPS or server and an existing C13 power cord. A male IEC 60320 C14 plug connects to the power source while the female C13 socket accepts the equipment cord without any adapter.

Heavy duty 14 AWG for server loads

The SJT-jacketed three-conductor copper cable is rated 15 A at 250 V with a 105 °C and 300 V insulation rating, making it suitable for servers, switches and AV gear in data-centre environments. Builders needing only light-duty 10 A or 13 A cords for desktop equipment should consider thinner gauges instead.

Fits standard rack power chains

The cord plugs directly into any IEC 60320 C14 outlet on a PDU or UPS and passes power through to a C13 inlet, leaving the original equipment cable free of strain. The red jacket aids circuit tracing in dense racks, and UL plus CSA certification (file E210037) confirms compliance for professional installations.

Highlights

  • Extends C14/C13 reach by 15 ft without adapters
  • Heavy-duty 14 AWG copper handles 15 A at 250 V
  • UL Listed and CSA certified for rack safety
  • Red jacket enables quick circuit tracing in dense racks
  • SJT jacket rated 105 °C / 300 V for server environments

Specifications

BrandGENERIC
ColorRed
Length11 - 15 ft.
Connector Number2
Wire Gauge14 AWG

Questions about this item

My device has a C14 inlet — what must I already have for this cord to connect it?

You need an existing C13-terminated cord that plugs into the female C13 socket on this extension; the male C14 plug then goes into your PDU, UPS or other C14 source.

Will the 14 AWG gauge on this red cord safely carry the same load as the 18 AWG cable I currently use?

No — 18 AWG is rated to 10 A, while this 14 AWG SJT cord is rated to 15 A / 250 V, so it handles higher server and PDU loads without overheating.

After I plug the C14 end into my PDU and the C13 end into my server cord, how can I confirm the extension is working as intended?

The UL Listed and CSA certified markings (file E210037) on the SJT jacket verify the 15 A / 250 V rating, and the red colour lets you trace the circuit visually in the rack.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.