We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 15 ft IEC C14 to C13 heavy duty power extension cord with SJT jacket

Cable Leader

Cable Leader 15ft IEC C14 to C13 Heavy Duty Power Extension Cord, 14 AWG SJT 15A/250V, Black

SKU CH-56M8-6NJ6B

Extends a C14/C13 power link by 15 ft with 14 AWG, 15 A, 250 V SJT cable, UL Listed and CSA certified

  • ColorBlack
  • Length11 - 15 ft.
  • Connector Number2
  • Wire Gauge14 AWG
  • Extends C14/C13 power connections without adapters
  • Heavy-duty 14 AWG copper handles 15A at 250V
  • SJT jacket rated 105C and 300V for rack reliability
  • UL Listed and CSA certified for safety compliance
  • Black jacket enables quick circuit identification in racks

Extends C14 to C13 power reach

This 15 ft black extension cord adds length between a rack PDU, UPS or server and your existing C13-ended power cable. It uses a male IEC 60320 C14 plug on one end and a female C13 socket on the other so no adapter is required. The heavy duty 14 AWG SJT jacketed cable contains three grounded copper conductors rated for 15A at 250V.

Upgrade from lighter gauge cords

An 18 AWG cord handles only up to 10A for light electronics, while a 16 AWG cord manages up to 13A for typical computers. This 14 AWG cord supports up to 15A, making the jump worthwhile when powering servers, switches or higher-draw rack equipment. It is not intended for 20A loads that require a 12 AWG cable.

Sustained load behaviour

The SJT jacket is rated to 105C and 300V, so the cord maintains its electrical integrity under continuous server and data-centre loads rather than just short bursts. UL Listing and CSA certification (file E210037) confirm compliance with safety standards for prolonged operation. RoHS compliance ensures restricted substances are absent throughout the cable.

Highlights

  • Extends C14/C13 power connections without adapters
  • Heavy-duty 14 AWG copper handles 15A at 250V
  • SJT jacket rated 105C and 300V for rack reliability
  • UL Listed and CSA certified for safety compliance
  • Black jacket enables quick circuit identification in racks

Specifications

BrandGENERIC
ColorBlack
Length11 - 15 ft.
Connector Number2
Wire Gauge14 AWG

Questions about this item

How much clearance does the 15 ft C14-to-C13 cord need behind a rack PDU?

The IEC 60320 C14 plug and C13 socket are standard low-profile connectors; allow roughly 50 mm behind the PDU for the plug body and strain relief.

What is the common mistake when routing this 14 AWG SJT cord through cable managers?

Installers often exceed the jacket's 105 °C rating by bundling it tightly with hot exhaust airflow; leave an air gap or use separate vertical managers.

When should the cord be replaced in a 15 A server environment?

Inspect annually; replace if the SJT jacket shows cracking, the C13 socket grips loosely, or the UL Listed E210037 label becomes illegible.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.