We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue 15 ft IEC C14 to C13 power extension cord with SJT jacket

Cable Leader

Cable Leader 15ft IEC C14 to C13 14 AWG 15A 250V Blue Power Extension Cord

SKU CH-CQ8F-N6E5V

A 15 ft heavy-duty 14 AWG extension adds reach between a C14 PDU or UPS and a C13 device, rated 15A at 250V with a blue SJT jacket for easy circuit tracing and UL/CSA certification

  • ColorBlue
  • Length11 - 15 ft.
  • Connector Number2
  • Wire Gauge14 AWG
  • Extends C14/C13 power connections by 15 ft without adapters
  • Heavy-duty 14 AWG copper handles 15 A at 250 V for server loads
  • SJT jacket rated 105 °C and 300 V withstands rack heat
  • Blue colour simplifies circuit tracing in dense racks
  • UL Listed and CSA certified (file E210037) plus RoHS compliant

Extends C14 to C13 power

This 15 ft blue extension cord bridges the gap between a rack PDU, UPS or server and your existing C13 power cord. The male IEC 60320 C14 plug connects to the power source while the female C13 socket accepts standard equipment cords. Heavy duty 14 AWG copper conductors carry up to 15 A at 250 V for server and data-centre loads.

Simple rack installation

Plug the C14 end into the PDU or UPS outlet and insert your device cord into the C13 socket; no tools or adapters are required. The SJT jacket is rated 105 C and 300 V, so it handles the heat inside dense cabinets. Mis-wiring is unlikely because both connectors are keyed, but verify the cord is fully seated to avoid intermittent contact.

14 AWG 15 A rating decides fit

Choose this cord when your equipment draws up to 15 A and needs a C14-to-C13 link; lighter 16 AWG or 18 AWG cords are rated for lower current. The UL Listed and CSA certified design (file E210037) meets rack safety requirements. If your gear needs 20 A service, a 12 AWG cord is the appropriate gauge instead.

Highlights

  • Extends C14/C13 power connections by 15 ft without adapters
  • Heavy-duty 14 AWG copper handles 15 A at 250 V for server loads
  • SJT jacket rated 105 °C and 300 V withstands rack heat
  • Blue colour simplifies circuit tracing in dense racks
  • UL Listed and CSA certified (file E210037) plus RoHS compliant

Specifications

BrandGENERIC
ColorBlue
Length11 - 15 ft.
Connector Number2
Wire Gauge14 AWG

Questions about this item

How can I verify the cord is working once I connect it to my PDU and server?

The male C14 plug seats in the PDU outlet and the female C13 socket accepts the server cord; power flows when both ends click home and the equipment powers on.

What comes in the package and is anything else required?

The package contains the 15 ft blue SJT-jacketed 14 AWG cord with a C14 plug on one end and a C13 socket on the other; no extra parts are needed to extend an existing C14/C13 link.

Which gauge should I choose for a 15 A server load?

The 14 AWG version is rated 15 A / 250 V and is the correct gauge for server, PDU and higher-draw equipment up to 15 A.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.