We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 14-inch Y-splitter cord with one male and three female grounded plugs

Cable Leader

Cable Leader 14in 5-15P to 3x 5-15R Power Splitter Cord 14 AWG 15A/125V Black

SKU CH-PNGM-M7PP4

Splits one 5-15P outlet into three 5-15R sockets using 14 AWG grounded cable rated 15A at 125V

  • TypePower Splitter
  • ColorBlack
  • Length14in
  • Terminal GenderMale to Female
  • Wire Gauge14 AWG
  • Powers three devices from one outlet with 14 AWG 15 A capacity
  • Heavy-duty 14 AWG copper conductors rated 15 A at 125 V
  • Space-saving Y design splits one feed for PCs and monitors
  • Fully grounded three-wire construction with molded connectors and strain relief
  • UL Listed and CSA certified file 210037 plus RoHS compliant

Single-Source Power Distribution

This 14-inch splitter converts one NEMA 5-15P plug into three 5-15R outlets, letting you run up to three devices from a single wall or PDU feed. It is built with 14 AWG, three-conductor grounded copper wire inside an SJT jacket rated for 15 amps at 125 volts and 105°C. The cord carries UL and CSA certifications under file E210037 and meets RoHS requirements.

Upgrade From Lighter-Gauge Cords

When a setup draws more than 10 amps, an 18 AWG cord is no longer adequate, and a 16 AWG lead tops out at 13 amps. Stepping up to this 14 AWG design supports the full 15-amp circuit rating used by many servers, rack PDUs and higher-draw workstations. The jump is worth it whenever the combined load of the connected gear approaches or exceeds the limits of thinner cables.

Build Integration

The Y-shaped layout keeps cable clutter low while feeding a PC, monitor and peripheral from one branch circuit. Molded connectors with strain relief protect the terminations during routine rack moves or desk reconfigurations. The black SJT jacket resists oil and abrasion in dense equipment cabinets. Buyers who need more than three outlets or a longer reach between the source and the devices should look for a different solution.

Highlights

  • Powers three devices from one outlet with 14 AWG 15 A capacity
  • Heavy-duty 14 AWG copper conductors rated 15 A at 125 V
  • Space-saving Y design splits one feed for PCs and monitors
  • Fully grounded three-wire construction with molded connectors and strain relief
  • UL Listed and CSA certified file 210037 plus RoHS compliant

Specifications

TypePower Splitter
ColorBlack
Length14in
Terminal GenderMale to Female
Wire Gauge14 AWG

Questions about this item

How much clearance does the 14-inch cord need behind a rack or desk?

The 14-inch overall length includes the molded connectors, so allow roughly that distance behind the equipment for the Y-split to sit without tension.

What is the correct way to seat the NEMA 5-15P plug so the ground pin stays engaged?

Push the 5-15P plug straight into the outlet until the faces meet; angling it can leave the ground pin partially exposed and defeat the 3-wire grounded design.

When should the splitter be replaced based on the 105 °C cable rating?

Replace the cord if the SJT jacket shows cracking, discoloration or stiffness from prolonged heat exposure, as the 105 °C rating marks the maximum safe operating temperature.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.