We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10 ft IEC C20 male to C19 female power extension cord with thick SJT jacket

Cable Leader

Cable Leader 10ft IEC C20 to C19 14 AWG 15A 250V Black Power Extension Cord

SKU CH-BYF5-E5S36

A 10 ft black extension cord with IEC 60320 C20 male to C19 female connectors, 14 AWG copper rated 15A at 250V, UL Listed and CSA certified for server and PDU rack use

  • TypeExtension Cable
  • ColorBlack
  • Length10 ft.
  • Terminal GenderMale to Female
  • Wire Gauge14 AWG
  • Adds reach to C20/C19 connections without an adapter
  • Heavy-duty 14 AWG copper rated 15A at 250V
  • SJT jacket withstands 105C and 300V cable rating
  • UL Listed and CSA certified (file E210037), RoHS compliant
  • Black jacket simplifies circuit and phase tracing in racks

Extends C20/C19 Power Reach

The Cable Leader 10 ft extension cord adds length between a rack PDU, UPS or server and your existing C19 cord. A male IEC 60320 C20 plug connects to the power source while the female C19 socket accepts the equipment cable. No adapter is required for the connection. Builders who need a C13/C14 link instead cannot use this cord.

Heavy-Duty 14 AWG SJT Construction

Three-conductor grounded copper at 14 AWG is rated for 15 A at 250 V and carries a 105 °C / 300 V cable rating. The SJT jacket resists abrasion in dense rack environments. Black insulation helps trace circuits and phases at a glance. UL Listed and CSA certified under file E210037 with RoHS compliance.

Thermals and Power in Rack Use

The 14 AWG conductors handle sustained 15 A loads without overheating in normal server and PDU applications. The SJT jacket remains stable at the rated 105 °C temperature ceiling. No active cooling is involved, so the cord adds no audible noise to the rack. Power draw is determined solely by the attached equipment.

Highlights

  • Adds reach to C20/C19 connections without an adapter
  • Heavy-duty 14 AWG copper rated 15A at 250V
  • SJT jacket withstands 105C and 300V cable rating
  • UL Listed and CSA certified (file E210037), RoHS compliant
  • Black jacket simplifies circuit and phase tracing in racks

Specifications

TypeExtension Cable
ColorBlack
Length10 ft.
Terminal GenderMale to Female
Wire Gauge14 AWG

Questions about this item

What current does the IEC 60320 C20/C19 connection support in practice?

The cord is rated 15A at 250V, so the C20 plug and C19 socket will carry up to 15A continuously.

What clearance does the 14 AWG SJT jacket need to route cleanly in a rack?

The 14 AWG SJT construction is stiff; allow at least a 50 mm bend radius behind the PDU to avoid kinking the 300V jacket.

How do you install it without reversing the polarity?

Plug the male C20 into the PDU or UPS first, then seat the female C19 onto your device cord — the keyed IEC 60320 shape prevents mis-insertion.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.