Cable Leader
Cable Leader 1 ft NEMA 5-15P to C15 14 AWG 15A Blue Power Cord
A 1 ft blue power cord with a NEMA 5-15P plug and IEC C15 connector, 14 AWG rated for 15 A at 125 V, UL Listed and CSA certified
- TypePower
- ColorBlue
- Length1 ft.
- Terminal GenderMale to Female
- Wire Gauge14 AWG
- Heavy-duty 14 AWG copper handles up to 15A for servers and PDUs
- UL Listed and CSA certified (file E210037) with RoHS compliance
- 1 ft blue SJT jacket rated 105C / 300V for durable use
- Fully grounded 3-wire design with molded connectors and strain relief
- NEMA 5-15P to IEC 60320 C15 fits PCs, monitors, printers and IEC-inlet equipment
Short reach for tight spaces
The Cable Leader 1 ft NEMA 5-15P to C15 cord links a wall outlet or PDU to a device with a C15 inlet using heavy-duty 14 AWG copper rated for 15 A at 125 V. Its SJT jacket withstands 105 °C and 300 V, and the fully molded, grounded connectors carry UL and CSA certification.
Ideal for rack gear not desktop PCs
Server, switch and PDU builders who need a short, high-temperature C15 lead will appreciate the 14 AWG gauge and safety listings. Buyers connecting standard desktop power supplies should look elsewhere because most ATX units use a C13 inlet, not the higher-temperature C15 connector this cord provides.
Fits 1 U cable arms and vertical PDUs
The one-foot length keeps excess slack out of dense rack cable managers while the blue jacket aids circuit identification. It plugs directly into any NEMA 5-15R receptacle and frees longer cords for runs that actually need reach.
Highlights
- Heavy-duty 14 AWG copper handles up to 15A for servers and PDUs
- UL Listed and CSA certified (file E210037) with RoHS compliance
- 1 ft blue SJT jacket rated 105C / 300V for durable use
- Fully grounded 3-wire design with molded connectors and strain relief
- NEMA 5-15P to IEC 60320 C15 fits PCs, monitors, printers and IEC-inlet equipment
Specifications
| Type | Power |
|---|---|
| Color | Blue |
| Length | 1 ft. |
| Terminal Gender | Male to Female |
| Wire Gauge | 14 AWG |
Questions about this item
Does my equipment need an IEC 60320 C15 inlet for this cord to fit?
Yes — the female end is a C15 connector that mates only with a C16 appliance inlet rated for higher temperature.
Will the 14 AWG conductors safely power an older server that draws close to 15 A at 125 V?
The cord is rated 15 A / 125 V with a 105 °C SJT jacket, so it matches the server’s original spec.
How can I verify the cord is correctly grounded after plugging it in?
A continuity tester between the 5-15P ground pin and the C15 ground contact should show a closed circuit.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



