We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small rectangular boxes with cables forming a USB camera extender kit over Cat6

C2G Canada

C2G Canada C2G54277 camera cable extender 150ft 1.5A

SKU CH-N19N-P7723 MPN C2G54277

Extends a USB camera up to 150ft over Cat6 with plug-and-play operation and up to 1.5A power delivery

  • Extends USB cameras up to 150ft over Cat6
  • Plug-and-play with no software or drivers required
  • Supports leading PTZ cameras at 1080p or 4K
  • Up to 1.5A power delivery from host to device
  • Bi-directional modules simplify installation as transmitter or receiver

C2G Superbooster USB Camera Extender

The C2G Superbooster USB Camera Extender extends a USB camera up to 150ft over Cat6 cabling. It is built for AV integrators and installers who need reliable signal transmission in conference rooms, classrooms, auditoriums and medical facilities. The kit includes one box transmitter and one box receiver for a plug-and-play connection with no software or drivers required. It has been tested and proven to support leading PTZ cameras at 1080p or 4K resolutions depending on the camera.

Low power consumption and bi-directional transfer

Typical power draw is 0.5W, keeping thermal load minimal during normal operation. Bi-directional data and power transfer allows the same module to function as either transmitter or receiver, simplifying installation. The extender delivers up to 1.5A of power from the host to the camera over the Cat6 link. Optional external power can be added to support high-current devices drawing up to 3A when needed.

Box-to-box kit for USB 2.0 camera extension

The system requires a single Cat6 cable (not included) between the two boxes to bridge distances up to 45.7m. It is compatible with USB 2.0 and works with USB 1.1 when a USB 2.0 hub is used on the device end. Dual-mode USB-C devices are supported when explicit device mode is selected. Buyers needing longer runs beyond 150ft or fibre-based extension will need a different solution.

Highlights

  • Extends USB cameras up to 150ft over Cat6
  • Plug-and-play with no software or drivers required
  • Supports leading PTZ cameras at 1080p or 4K
  • Up to 1.5A power delivery from host to device
  • Bi-directional modules simplify installation as transmitter or receiver

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the box transmitter and receiver modules, and which step is most often missed?

Connect each module to the host and camera with USB cables, run a single Cat6 cable between the two boxes up to 150ft, and ensure both modules are set to the correct transmitter or receiver role using the bi‑directional switch.

What maintenance or replacement will the extender need over time?

No scheduled maintenance is required; the solid‑state extender has no moving parts or consumable components, so replacement is only needed if a module or the Cat6 cable is physically damaged.

What limit appears first when the extender runs continuously at high resolution?

The 1.5A power delivery from the host to the camera is the first constraint; if the camera draws more than 1.5A, optional external power up to 3A must be added to sustain operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.