We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
C2G USB camera extender kit with wall plate and box units

C2G Canada

C2G Canada C2G54276 USB Camera Extender Kit 150 ft

SKU CH-3K05-1ACX4 MPN C2G54276

Extends USB camera connections up to 150 feet over Cat6 cable with plug-and-play wall-plate and box units

  • Extends USB camera signals up to 150 ft over Cat6
  • Plug-and-play wall plate and box swap as transmitter or receiver
  • Tested compatible with leading PTZ and video conferencing cameras
  • Chipset design delivers higher compatibility than other USB extenders
  • Powers connected devices with 1.5 A supply

C2G Superbooster USB Camera Extender Kit

The C2G Superbooster USB Camera Extender Kit connects a USB camera to a host computer at distances up to 150 feet (45.7 m) using a standard Cat6 network cable. The kit includes one single-gang wall plate and one box, each configurable as a transmitter or receiver for flexible deployment. It is designed for conference rooms, classrooms, command centers, and medical facilities where cameras must be placed far from the host. The system operates at up to 90% relative humidity in non-condensing environments.

Cat6 cable distance and USB data limits

The extender transmits USB data signals only and does not support DisplayPort Alt Mode, so it cannot carry video streams that require that protocol. Maximum reach is 150 feet (45.7 m) over Cat6 cabling; signal integrity beyond this distance is not supported. The unit draws up to 1.5 Amps, which must be supplied by the host USB port or an available power source. Operating humidity must not exceed 90% RH non-condensing for reliable performance.

Plug-and-play wall plate and box installation

Installation is plug-and-play with no driver software required, reducing setup time for AV integrators. The wall plate fits a standard single-gang electrical box, while the box unit sits on a surface or mounts as needed; both units function as either transmitter or receiver. Common issues include exceeding the 150-foot Cat6 limit, using lower-grade cable, or connecting devices that need DisplayPort Alt Mode. Ensure the host USB port can deliver sufficient current for the 1.5 Amp draw.

Highlights

  • Extends USB camera signals up to 150 ft over Cat6
  • Plug-and-play wall plate and box swap as transmitter or receiver
  • Tested compatible with leading PTZ and video conferencing cameras
  • Chipset design delivers higher compatibility than other USB extenders
  • Powers connected devices with 1.5 A supply

Specifications

No published specifications for this item yet.

Questions about this item

Which version of the Superbooster USB Camera Extender should I choose for a 150 ft run?

The C2G54276 kit supports USB camera extension up to 150 ft (45.7 m) over a single Cat6 cable and includes both a wall plate and a box unit.

What does the 150 ft distance mean when the kit is installed in a conference room?

It allows a USB camera to operate reliably up to 150 ft (45.7 m) from the host computer using standard Cat6 cabling, tested with leading PTZ conferencing cameras.

What interface does the extender use and what does it limit in practice?

The extender transmits USB data only over Cat6 cable and does not support DisplayPort Alt Mode, so video must be carried by the USB camera's own data stream.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.