We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular transmitter and receiver units with USB and RJ45 ports, plus power cables

C2G Canada

C2G Canada C2G54265 4-Port USB 3.2 Superbooster Extender Kit 328 ft Cat6a

SKU CH-X2XB-4BTSJ MPN C2G54265

Extends four USB-A devices 328 ft over one Cat6a cable with 5 Gb/s bandwidth and plug-and-play setup

  • Extends four USB-A devices 328 ft over one Cat6a cable
  • Delivers 5 Gbps USB 3.2 Gen1 bandwidth with USB 2.0/1.1 backward compatibility
  • Powers ports 1-2 at 5V/1.5A and ports 3-4 at 5V/1A via 24V PoC
  • Adds RS-232 and FSYNC GPIO pass-through for control and sync signals
  • Installs plug-and-play with no driver installation required

Kit Contents and Core Function

This kit extends four USB-A devices up to 328 ft over a single Cat6a cable. It includes a transmitter with one USB-B host port and one RJ45 HDBT port, plus a receiver with four USB-A ports. The system delivers up to 5 Gb/s bandwidth and supports bi-directional 24V PoC, RS-232 pass-through, and FSYNC GPIO pass-through.

Who This Suits and Who It Does Not

Installers needing to place cameras, whiteboards, or storage far from the host computer will benefit from the multi-port design and driver-free setup. Buyers who only need a single device extension or require longer runs than 328 ft should look at other solutions. The kit also assumes Cat6a cabling is already planned or in place.

Deciding Specification

The single figure that determines fit is the 328 ft extension distance over Cat6a at 5 Gb/s. If the installation exceeds this range or the infrastructure uses lower-grade cabling, this extender will not meet the requirement.

Highlights

  • Extends four USB-A devices 328 ft over one Cat6a cable
  • Delivers 5 Gbps USB 3.2 Gen1 bandwidth with USB 2.0/1.1 backward compatibility
  • Powers ports 1-2 at 5V/1.5A and ports 3-4 at 5V/1A via 24V PoC
  • Adds RS-232 and FSYNC GPIO pass-through for control and sync signals
  • Installs plug-and-play with no driver installation required

Specifications

No published specifications for this item yet.

Questions about this item

What comes in the kit and what must I supply myself?

The kit includes a transmitter with one USB-B host port and one RJ45 HDBT port, and a receiver with four USB-A ports. Both units have DC input ports and USB-C firmware-update ports. You must provide a Cat6a Ethernet cable up to 328 ft and power adapters for the DC inputs.

How do the four USB-A ports on the receiver differ so I can pick the right one for each device?

Ports 1 and 2 each deliver up to 5V/1.5A, while ports 3 and 4 each deliver up to 5V/1A. Match higher-draw devices to the first two ports and lower-draw peripherals to the last two.

What does the 5 Gb/s headline speed mean when the extender is connected in my system?

The link runs at up to 5 Gb/s over the Cat6a cable between transmitter and receiver. Actual device throughput will depend on the connected USB peripherals and the host controller, but the extender itself does not reduce the USB 3.2 Gen1 bandwidth.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.