C2G Canada
C2G Canada 2 in 1 accessory HDMI 4 port splitter 4K 30Hz 1x4
Splits one HDMI source to four displays at 4K 30Hz with HDCP 1.4 compliance
- Splits one HDMI source to four displays
- 4K 30 Hz output on all four ports
- HDCP 1.4 compliant for protected content
- Up to 10.2 Gbps bandwidth per port
- Supports 4096 x 2160 at 30 Hz 4:4:4
Signal Distribution
The C2G Canada 2 in 1 accessory HDMI 4 port splitter 4K 30Hz 1x4 takes a single HDMI source and sends it to four displays simultaneously. It supports video up to 4096 x 2160 at 30Hz with 4:4:4 colour sampling and handles data rates up to 10.2 Gbps. The unit is HDCP 1.4 compliant and works with computers, media players, gaming consoles and A/V receivers.
Source And Cable Check
Confirm your source device can output 4096 x 2160 at 30Hz or 60Hz with 4:2:0 chroma subsampling over HDMI 1.4. Use certified High Speed HDMI cables rated for 10.2 Gbps on both the input and all four output runs. The splitter requires a stable 5 V power supply; verify the included adapter matches your local mains voltage before connecting.
Build Integration
The splitter fits between the source and up to four screens without adding latency or scaling. It frees the host from driving multiple native outputs and lets a single HDMI 1.4 port feed a multi-monitor wall or duplicate content across rooms. No software drivers are needed; the device is transparent to the operating system and passes EDID from the first connected display.
Highlights
- Splits one HDMI source to four displays
- 4K 30 Hz output on all four ports
- HDCP 1.4 compliant for protected content
- Up to 10.2 Gbps bandwidth per port
- Supports 4096 x 2160 at 30 Hz 4:4:4
Specifications
No published specifications for this item yet.
Questions about this item
Does the C2G Canada HDMI 4 port splitter include cables or do I need to buy them separately?
The product is the splitter unit itself; HDMI cables for the source and each display are not included and must be purchased separately.
Should I choose the 4K 30Hz 4:4:4 mode or the 4K 60Hz 4:2:0 mode for my setup?
Use 4096 x 2160 at 30Hz with 4:4:4 for full colour detail on desktop or media; choose 60Hz 4:2:0 only if the source requires 60Hz and can accept chroma subsampling.
What does the 10.2 Gbps bandwidth mean when I connect four 4K displays?
The 10.2 Gbps limit carries one 4K 30Hz 4:4:4 signal duplicated to four outputs; it cannot drive four independent 4K streams simultaneously.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
