BZBGEAR
BZBGEAR BG-STREAM-NE HDMI to IP/UVC audio video converter
Converts HDMI to IP and USB 3.0 UVC with H.264/H.265 encoding up to 1920x1080 at 60/50fps and AAC-LC audio
- AudioAAC-LC Configurable bit rate range from 32Kbps to 384Kbps Sa
- Dimensions6×4×2 in
- Weight1 lb
- Package Contents1x BG-STREAM-E 1x DC Power Adapter
- HDMI to IP and USB 3.0 UVC output for flexible streaming workflows
- Hardware H.264/H.265 encoding up to 1920x1080p at 60/50fps
- AAC-LC audio with 32 to 384Kbps configurable bit rate at 48KHz
- Power over Ethernet plus DHCP for simple network deployment
- Web UI enables real-time recording and multi-protocol stream management
HDMI to IP and UVC converter
The BZBGEAR BG-STREAM-NE converts a single HDMI source into simultaneous IP streams and USB 3.0 UVC output. It is built for live producers, integrators and remote‑collaboration teams who need reliable encoding without a host PC. The unit handles 1920x1080p at 50 or 60 fps using H.264 or H.265 compression. Audio is encoded as AAC‑LC at 48 KHz with a configurable bit rate from 32 to 384 Kbps.
Power over Ethernet and web UI
The package includes a DC power adapter, yet the RJ45 port also accepts Power over Ethernet so a separate supply is optional. A built‑in web interface lets you configure streaming protocols — RTSP, RTMP, HLS, TS, SRT, NDI HX and Dante AV‑H — without extra software. USB 3.0 Type‑B UVC support means the encoder appears as a standard camera to conferencing and recording apps. Real‑time mode recording captures the incoming signal instantly for immediate playback.
Check HDMI source and network readiness
Verify that your HDMI source outputs 1920x1080p at 50 or 60 fps; higher resolutions or frame rates are not supported. Ensure your network infrastructure can sustain the chosen bit rate and that any managed switches allow the required multicast or unicast traffic for the selected protocols. If you plan to use UVC, confirm the host system has a free USB 3.0 Type‑B port and recognises UVC devices natively. Dante AV‑H integration requires a Dante‑enabled network and controller software.
Highlights
- HDMI to IP and USB 3.0 UVC output for flexible streaming workflows
- Hardware H.264/H.265 encoding up to 1920x1080p at 60/50fps
- AAC-LC audio with 32 to 384Kbps configurable bit rate at 48KHz
- Power over Ethernet plus DHCP for simple network deployment
- Web UI enables real-time recording and multi-protocol stream management
Specifications
| Audio | AAC-LC Configurable bit rate range from 32Kbps to 384Kbps Sample rate: 48KHz, 16bit |
|---|---|
| Dimensions | 6×4×2 in |
| Weight | 1 lb |
| Package Contents | 1x BG-STREAM-E 1x DC Power Adapter |
Questions about this item
Will the USB 3.0 Type-B UVC output need driver updates or firmware changes over time?
The USB 3.0 Type-B port uses standard UVC protocol so most operating systems recognise it without extra drivers; firmware updates are delivered through the web UI when released.
What caps the bitrate when I stream 1080p60 continuously over the RJ45 link?
The encoder tops out at 1920x1080p at 60fps using H.264 or H.265 compression, so sustained throughput is limited by that maximum encoding ceiling.
How hot does the unit get and does the fan run constantly during all-day encoding?
The compact metal chassis relies on passive cooling; with PoE or the DC adapter it stays warm but silent during continuous 1080p60 operation.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



