We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact silver metal desktop switch with six RJ45 ports and external power brick

BV-Tech 6-Port Gigabit PoE+ Switch 60W Hi-PoE 820ft Extend Mode

SKU CH-7G01-ZJYR9

Provides four PoE+ ports and two Gigabit uplinks with a 60W budget and 820ft extend mode

  • FormatDesktop
  • StandardsPassive PoE
  • Network MediaRJ45
  • Uplink InterfaceRJ45
  • Uplink Speed10/100 Mbps
  • Uplink Speed/TypeRJ45
  • Gigabit speeds on all six ports for fast wired networking
  • 60 W total PoE budget powers cameras and access points
  • Hi-PoE port one delivers up to 60 W for demanding devices
  • Extend mode reaches 820 ft at 10 Mbps for remote runs
  • Fanless metal housing operates silently from 14 °F to 131 °F

6-Port Gigabit PoE+ Switch

The BV-Tech switch provides four PoE+ Gigabit ports and two Gigabit uplink ports in an unmanaged desktop form factor. It delivers a 60W total power budget with one Hi-PoE port capable of 60W and three ports providing up to 30W each. A fanless metal housing ensures silent operation.

Suits IP camera and access point deployments

This switch fits installers who need long-distance PoE runs up to 820ft at 10 Mbps and an automatic watchdog that restarts failed ports. Buyers requiring managed features such as VLANs, SNMP or link aggregation should look at a managed model instead.

60W budget powers four devices

The 60W pool comfortably handles multiple IP cameras or wireless access points simultaneously, with the orange port reserved for the highest-draw unit. When all four PoE ports are fully loaded the budget is exhausted, so a fifth powered device would need an additional injector or switch.

Highlights

  • Gigabit speeds on all six ports for fast wired networking
  • 60 W total PoE budget powers cameras and access points
  • Hi-PoE port one delivers up to 60 W for demanding devices
  • Extend mode reaches 820 ft at 10 Mbps for remote runs
  • Fanless metal housing operates silently from 14 °F to 131 °F

Specifications

BrandNETGEAR
SeriesProSafe
Part NumberPOE-SW502G
FormatDesktop
StandardsPassive PoE
Network MediaRJ45
Uplink InterfaceRJ45
Uplink Speed10/100 Mbps
Uplink Speed/TypeRJ45
Primary Port Count6
Primary Ports16 x SFP + 8 x RJ45
Primary Port Speed10/100Mbps + 1000Mbps
Primary Port TypeRJ45
Management InterfaceRJ45
Jumbo Frames9216 bytes
Packet Forwarding Rate1000 megabits_per_second
SNMPNo
Layer 2 FeaturesRJ45, 1000 megabits_per_second, 6
Layer 3 FeaturesGigabit-2 Uplinks
CablingRJ45
PowerAC 120/230 V ( 50/60 Hz )
Max Power Consumption52.5 volts_of_direct_current
Dimensions14.33in W x 12.83in H x 9.06in D
Weight0.885 kilograms
Certificationnot_applicable
Max Heat Dissipation60 watts
Features6, RJ45, 1000 megabits_per_second, Metal, Black

Questions about this item

What cables do I need to connect devices to the four PoE ports and two uplink ports?

Use standard RJ45 Ethernet cables for all six ports; the four PoE ports deliver data and power over the same cable, while the two uplinks carry data only.

Will my existing 10/100 Mbps cameras and access points work with the gigabit PoE ports?

Yes, each PoE port auto-negotiates to 10, 100 or 1000 Mbps, so legacy 10/100 devices connect at their rated speed while still receiving PoE power.

How can I verify the switch is delivering power and passing traffic after I plug everything in?

Check the per-port LED indicators on the front panel — they show link/activity and PoE status for each connected device.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.