We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black aluminium switch panel with silver rotary actuator and pre-labelled face plate

Buyers Products Company

Buyers Products Company SW700 Switch Panel Aluminum

SKU CH-YV8G-8VWTF

Aluminium rotary switch panel rated 20 A at 12 V with corrosion-resistant brass stems and pre-labelled face plate

  • MaterialHAWA
  • 20 A continuous power for heavy-duty circuits
  • Rotary on/off action gives positive tactile control
  • Corrosion-resistant brass stems extend service life
  • Pre-labeled face plate speeds up installation
  • Compact 3/4 in square fits tight panels

Switch Panel for 12V DC Circuits

This aluminium switch panel fits a standard panel-mount cut-out and provides a single rotary on-off function. It is rated for 20 amps at 12 volts DC and includes a pre-labelled face plate for quick circuit identification. The corrosion-resistant brass mounting stems suit automotive, marine and grounds-maintenance installations.

Thermal and Electrical Behaviour

The brass stems and aluminium body conduct heat away from the contacts during continuous 20-amp loads. No active cooling is required because the switch operates within its rated thermal envelope at 12V DC. The rotary mechanism produces only a light mechanical click with no electrical hum or fan noise.

Included Face Plate and Mounting Hardware

The pre-labelled face plate removes the need for separate legend printing and speeds up panel wiring. Brass mounting stems resist salt-spray corrosion better than plain steel hardware, extending service life in exposed environments. No additional software, cables or configuration tools are supplied or required.

Highlights

  • 20 A continuous power for heavy-duty circuits
  • Rotary on/off action gives positive tactile control
  • Corrosion-resistant brass stems extend service life
  • Pre-labeled face plate speeds up installation
  • Compact 3/4 in square fits tight panels

Specifications

BrandBUYERS PRODUCTS
MaterialHAWA

Questions about this item

How do I panel-mount the SW700 switch and what step is often missed?

Cut a 3/4 in by 3/4 in panel opening, insert the switch, and secure the corrosion-resistant brass mounting stems; the step often missed is tightening the stems evenly so the face plate sits flush.

What part of the SW700 will need replacement after extended use?

The rotary switch mechanism rated for 20 A at 12V DC is the wear item; the pre-labeled face plate and nylon body typically outlast the contact assembly.

What limit appears first when the SW700 runs continuously at full load?

The 20 A at 12V DC rating is the first limit; sustained operation at that current will cause the brass contacts to heat up before any other component reaches its limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.