Buyers Products Company
Buyers Products Company 10033 PM87 Pintle Hitch Mounting Plate
Heavy-duty steel mounting plate rated for 14,000 lb gross vehicle weight and 2,800 lb tongue weight with corrosion-resistant black powder coat finish
- TypeTrailer, Plow & Towing Equipment
- ColorBlack
- Supports heavy loads with 14,000 lb GVW capacity
- Handles 2,800 lb tongue weight for secure towing
- Fits 2 in shank diameter for standard pintle hooks
- Corrosion-resistant black powder-coated steel finish
- One-piece cast iron housing with greaseable design
PM87 Pintle Hitch Mounting Plate
The PM87 is a steel mounting plate with a black powder-coated finish designed for pintle hook installation. It has a gross vehicle weight capacity of 14,000 lb and a tongue weight rating of 2,800 lb. The one-piece cast iron housing includes a greaseable design for maintenance. Three mounting holes accept a 2 in shank diameter.
Towing setups needing a 2 in shank
This plate suits trailers and plows requiring the specified hole spacing and weight ratings. Builders who need a different shank diameter or a four-hole bolt pattern should look at other mounting options. The fixed horizontal and vertical hole distances limit compatibility to matching hitches.
Bolt-on installation with standard hardware
The three 1/2 in holes allow direct bolting to a compatible hitch frame using common fasteners. Corrosion-resistant coating helps the plate withstand road salt and moisture. Misaligned holes on the host frame are the most common fitment issue. The 15.5 lb weight makes single-person handling straightforward.
Highlights
- Supports heavy loads with 14,000 lb GVW capacity
- Handles 2,800 lb tongue weight for secure towing
- Fits 2 in shank diameter for standard pintle hooks
- Corrosion-resistant black powder-coated steel finish
- One-piece cast iron housing with greaseable design
Specifications
| Brand | BUYERS PRODUCTS |
|---|---|
| Type | Trailer, Plow & Towing Equipment |
| Color | Black |
Questions about this item
What pintle hook shank diameter does the PM87 plate accept?
The plate is built for a 2 in shank diameter on compatible pintle hooks.
Will the three-hole bolt pattern on the PM87 match the factory tow-bar holes on my older truck?
The holes sit 3 3/8 in apart horizontally and 1 3/4 in vertically, each 1/2 in wide — measure your existing pattern against those spacings.
How can I confirm the PM87 is seated correctly after bolting it on?
All three 1/2 in bolts should be torqued evenly, the black powder-coated face sits flush against the frame, and the grease fitting on the one-piece cast housing is accessible for lubrication.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
