Bussmann
Bussmann S501-10-R Fuse Fast Acting 10A 250V AC line protection
Fast-acting 10 A ceramic fuse rated for 250 V AC with a 1.5 kA interrupt capacity
- TypeCircuit Breakers
- Fast-acting 10 A fuse clears faults quickly
- 250 V AC rating suits mains-voltage circuits
- 5 kA interrupt rating handles short-circuit energy
- 20 mm × 5 mm ceramic body fits standard holders
- UL, CSA and CE certifications confirm compliance
Bussmann S501-10-R Fast Acting Fuse
The Bussmann S501-10-R is a fast-acting cylindrical fuse rated at 10A and 250V AC for line protection. It features a ceramic body measuring 20mm in length and 5mm in diameter with a 1.5 kA interrupt rating. The non-indicating, single-element design comes in a package quantity of five. It carries CE, CSA and UL certifications.
Suits 10A 250V AC circuits needing fast-acting
This fuse suits applications requiring fast-acting response on 250V AC lines with a 10A rating. It fits holders compatible with the HTB fuse block series and matches the 20mm x 5mm cylindrical form factor. Buyers needing a visual indication of fuse status should look elsewhere as this model is non-indicating. Circuits demanding a higher interrupt rating or a different voltage rating also require a different part.
Simple cylindrical installation in compatible
Installation consists of inserting the 20mm x 5mm ceramic body into a compatible fuse block such as the HTB series. The non-rejection design allows fitment without a keyed holder. What usually goes wrong is using a fuse with the wrong ampere rating or voltage rating for the circuit. Ensure the 10A and 250V AC ratings match the system requirements before fitting.
Highlights
- Fast-acting 10 A fuse clears faults quickly
- 250 V AC rating suits mains-voltage circuits
- 5 kA interrupt rating handles short-circuit energy
- 20 mm × 5 mm ceramic body fits standard holders
- UL, CSA and CE certifications confirm compliance
Specifications
| Brand | EATON BUSSMANN |
|---|---|
| Type | Circuit Breakers |
Questions about this item
What fuse block series is required to install the S501-10-R fuse?
The S501-10-R fuse is compatible with the HTB fuse block series for proper installation.
Will the 10A fast-acting fuse protect older equipment rated for 250V AC circuits?
Yes, the fuse carries a 1.5 kA interrupt rating at 250V AC and is certified to CE, CSA, and UL Guide JDYX2 standards.
How can I verify the fuse is intact after fitting it into the holder?
The non-indicating ceramic body requires a continuity test with a multimeter to confirm the single element is intact.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
