Bussmann
Bussmann M.2 NVME SATA SSD Enclosure USB 3.2 Gen 2 10 Gbps 2242/2260/2280
Aluminium M.2 enclosure takes NVMe and SATA SSDs in 2242, 2260 or 2280 sizes over USB 3.2 Gen 2 at 10 Gbps with UASP and TRIM support
- USB 3.2 Gen 2 delivers 10 Gbps transfer speed for rapid file moves
- Supports NVME and SATA M.2 drives in 2242, 2260, 2280 sizes for broad compatibility
- RTL9210B controller with UASP and Trim boosts performance and extends SSD lifespan
- Aluminium alloy shell provides durable construction and effective heat dissipation
- Includes both USB-C and USB 3.0 Type-A cables plus thermal pads and screwdriver
Versatile M.2 NVME SATA enclosure
This aluminum enclosure turns a 2242, 2260 or 2280 M.2 SSD with M-Key or B+M-Key into a portable USB drive. It accepts both NVME PCI-E and SATA protocol drives, making it useful for repurposing internal storage or moving large data sets between machines. The RTL9210B controller supports UASP and TRIM for sustained performance and longer drive life.
USB 3.2 Gen 2 10 Gbps interface limit
The Type-C connector delivers up to 10 Gbps and is backward compatible with USB 3.1 Gen 1 and USB 3.0 at 5 Gbps. Maximum throughput depends on the host port and cable; older USB-A ports will restrict speed to the lower standard. The enclosure does not support M.2 PCIe AHCI drives, Wi-Fi cards, capture cards, mSATA SSDs or non-M.2 form factors.
Capacity headroom for 2280 drives
The tray fits the full 2280 length, so most consumer M.2 SSDs install without modification. Thermal pads are included to help the aluminum shell dissipate heat during sustained transfers. Drives larger than 2280 or using unsupported keying cannot be mounted, and the single USB-C link caps total bandwidth at the interface maximum regardless of drive speed.
Highlights
- USB 3.2 Gen 2 delivers 10 Gbps transfer speed for rapid file moves
- Supports NVME and SATA M.2 drives in 2242, 2260, 2280 sizes for broad compatibility
- RTL9210B controller with UASP and Trim boosts performance and extends SSD lifespan
- Aluminium alloy shell provides durable construction and effective heat dissipation
- Includes both USB-C and USB 3.0 Type-A cables plus thermal pads and screwdriver
Specifications
No published specifications for this item yet.
Questions about this item
Which M.2 lengths does this enclosure accept?
It fits 2242, 2260 and 2280 modules with M-Key or B+M-Key connectors.
What real-world speed can I expect over USB 3.2 Gen 2?
The 10 Gbps link supports UASP and Trim, so an NVME drive will saturate the bus while a SATA drive hits its native limit.
Does the Type-C port require a Thunderbolt host for full speed?
No, USB 3.2 Gen 2 10 Gbps on a standard Type-C or Type-A 3.1/3.0 port delivers the rated throughput.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
