Bussmann
Bussmann HHK In-Line Fuse Holder 20 A 32 V 14 AWG
An inline fuse holder accepting 1¼ × ¼ inch ceramic or glass fuses up to 20 A at 32 V AC/DC, supplied with 14 AWG wire leads in a nylon body
- Handles up to 20 A for reliable circuit protection
- Rated 32 V AC/DC for versatile low-voltage use
- Accepts 14 AWG wire leads for secure inline connections
- Compact 0.56 in body fits tight generator panels
- Compatible with 311, 312, 313, 314, 315, 322, 326 series fuses
Bussmann HHK In-Line Fuse Holder
The Bussmann HHK in-line fuse holder accepts ceramic or glass fuses up to 20 A at 32 V AC or DC. It uses 14 AWG wire leads and a nylon body measuring 0.56 in by 0.56 in. Designed for automotive and low-voltage circuits, it suits installers who need a compact, non-breakaway inline connection.
Compatible fuse series
This holder fits 1 1/4 in by 1/4 in fuses from series 311, 312, 313, 314, 315, 322, 326, 3AG, ABC, ACG, GAB, GBB, GDL, GDV, GGC, GSA, MDA, MDL, MDQ, MDV, MDX and MMB. Choose it when you need a single-pole, non-indicating, non-rejection inline block for those specific fuse types.
Wiring and mounting checks before ordering
Verify that your circuit operates at or below 32 V and that the current draw stays within the 0 to 20 A range. Confirm the fuse you plan to use matches one of the listed series and the 1 1/4 in by 1/4 in form factor. Ensure 14 AWG wire leads are suitable for your harness and that the inline mounting style fits your available space.
Highlights
- Handles up to 20 A for reliable circuit protection
- Rated 32 V AC/DC for versatile low-voltage use
- Accepts 14 AWG wire leads for secure inline connections
- Compact 0.56 in body fits tight generator panels
- Compatible with 311, 312, 313, 314, 315, 322, 326 series fuses
Specifications
| Brand | EATON BUSSMANN |
|---|
Questions about this item
What wire gauge does the HHK in-line fuse holder accept?
The holder is built for 14 AWG wire leads, so strip and crimp or solder to that gauge for a secure connection.
Which fuse sizes and series fit this holder?
It accepts 1 1/4 in x 1/4 in ceramic or glass fuses from series 311, 312, 313, 314, 315, 322, 326, 3AG, ABC, ACG, GAB, GBB, GDL, GDV, GGC, GSA, MDA, MDL, MDQ, MDV, MDX, MMB up to 20 A.
When should the fuse or holder be replaced?
Replace the fuse after any over-current event that opens it; inspect the nylon body and wire leads for heat damage or cracking during routine checks and swap the holder if either shows deterioration.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
